Serving Gillette, Wyoming and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

Gas & Electric Dryer Repair in Gillette, WY

Local repair companies near Gillette, WY for gas dryers and electric dryers, with companies that mention gas appliance work listed first.

Gas dryer not heating in Gillette?
Call our helpline to be connected with a technician who repairs gas and electric dryers.
☎(888) 772-9805
✓6 companies listed for Gillette✓Independent, not a manufacturer✓Public ratings & distances

A gas dryer that tumbles but stays cold usually points to the ignition system, while an electric dryer with the same symptom points to the element, fuses or power supply. Below are independent repair companies within reach of Gillette, with those that list gas appliance or dryer work shown first.

Gas & Electric Dryer Repair Near Gillette

7 repair companies serve Gillette from within 83 miles. 2 list an address in Gillette, and the rest are spread across Sheridan (3) and Spearfish (2). Distances run up to about 83 miles. Of those, 3 mention gas appliance or dryer work by name. Shield Appliance is the nearest, roughly 1.2 miles from Gillette. Across 4 rated companies, the average public rating is 4.5 stars. Gillette is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Appliance Repair
Shield Appliance
816 E 3rd St, Gillette, WY 82716
1.2 mi from Gillette
★★★★½ 4.5 (25 reviews)
Washer & Dryer Repair
Sears Appliance Repair
2571 N Main St, Sheridan, WY 82801
81.4 mi from Gillette
DryersWashersSaturday hours
Appliance Repair
Appliance Repair Company
302 Wild Prairie Rd, Gillette, WY 82718
21.9 mi from Gillette
★★★★ 4.2 (53 reviews)
Washer & Dryer Repair
Sears Appliance Repair
1467 Coffeen Ave, Sheridan, WY 82801
79.3 mi from Gillette
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
137 E Illinois St, Spearfish, SD 57783
82.4 mi from Gillette
DryersWashersSaturday hours
Appliance Repair
A Plus Plumbers & Appliance Repair, LLC
1150 Broadway St, Sheridan, WY 82801
80.6 mi from Gillette
★★★★½ 4.4 (53 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Gillette repair companies in numbers
Three nearest companies, miles away1.2, 21.9, 79.3
Show laundry appliance work3
Mention gas appliance work0
Companies within 83 miles7
With 4.5+ stars and at least 10 reviews2
Open on Saturdays (per listing)3

At the top of the Gillette list: Shield Appliance (1.2 miles away, 4.5 stars from 25 reviews); Sears Appliance Repair (81.4 miles away, based in Sheridan, lists Saturday hours); Appliance Repair Company (21.9 miles away, 4.2 stars from 53 reviews); Sears Appliance Repair (79.3 miles away, based in Sheridan, lists Saturday hours).

⚡ One call to reach a local dryer tech
☎(888) 772-9805

How Gas and Electric Dryers Differ

What they shareBoth types use the same drum, belt, rollers, motor and blower, and both depend on a clear vent. Many no-heat calls on either type start and end with the vent.
Propane conversionsGas dryers are set up for natural gas or propane, and switching requires the manufacturer's conversion parts. That work should be done by someone qualified for gas work.

Angi notes electric dryers are easier to fix with simple parts like belts, switches and heaters, while gas dryer work calls for a gas appliance repair professional. Source: Angi - Gas vs. Electric Dryers

Gas Dryer Parts That Fail

Airflow and the ventA long dry time is most often an airflow problem. A technician checks the lint screen housing, the duct behind the dryer and the exhaust hood outside before replacing any heating parts, because a restricted vent can make a healthy dryer look broken.
Door switch and start circuitA dryer that does nothing when Start is pressed may have a failed door switch, start switch, fuse or control board. Checking power at the outlet comes first, since an electric dryer needs both legs of a 240-volt circuit to heat.

No Heat on an Electric Dryer

Thermal fuse and thermostatsA thermal fuse is a one-time safety device that opens when the dryer overheats. A blown fuse usually points to a blocked vent, so a good technician replaces the fuse and finds out why it blew.
Drum belt, rollers and idler pulleySqueals, thumps and a drum that will not turn trace back to the belt, the drum support rollers, the idler pulley or the drum glides. These are wear parts and are often replaced together.

Gas Safety Around the Dryer

Never turn back on gas that was shut off for safety, and have gas line work done by a licensed plumber or the gas company. Source: Connecticut Public Utilities Regulatory Authority - What To Do If You Smell Natural Gas

Have a professional inspect a gas dryer's gas line and connection for leaks and damage. Source: NFPA (via U.S. Department of Energy) - Clothes Dryer & Washing Machine Safety

More: gas dryer not heating and dryer not heating.

Dryer Heating Repair Cost Ranges

Gas and electric dryers have different heat-source parts but similar labor. Published ranges for common repairs:

Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Dryer Notes for Gillette, WY

Most dryer calls in Gillette come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Gas piping and gas appliance installer licensing in Wyoming is handled by local governments in at least some cities; Casper, for example, licenses gas utility installers to install gas piping from the building out and gas appliances. Source: City of Casper: Plumbing, Mechanical, and Individual Contractor Licenses

In Wyoming, you can check a license with the Wyoming State Fire Marshal Public Portal (electrical licensing) or report a problem to the Wyoming Attorney General, Consumer Protection and Antitrust Unit.

Questions to Ask a Gillette Technician

  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Is your company licensed where my state requires it, and insured?
  • If a part has to be ordered, how soon can you come back to finish?

Gas & Electric Dryer Repair FAQs: Gillette, WY

Which costs more to fix, gas or electric?
The common heat-source parts on both are modestly priced, and labor is similar. Gas dryers add ignition parts that electric models do not have. Our cost guide lists published ranges for both.
Which areas near Gillette do these technicians cover?
The companies on this page are within driving distance of Gillette. Each one sets its own service area, so check the distance shown and confirm your address when you call.
How do I know if my dryer is gas or electric?
A gas dryer has a gas pipe and shutoff valve behind it and plugs into a regular household outlet. An electric dryer plugs into a large 240-volt outlet and has no gas line. The rating label inside the door also says which it is.

Other Dryer Repair in Gillette

Gas & Electric Dryer Repair in Nearby Cities

Note whether your dryer is natural gas, propane or electric, and what happens when you press Start. That tells a Gillette technician which parts to bring.

Tell us the fuel type and the symptom and we will connect you
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech