GE owners in Wynne usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Wynne, with those that mention GE first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Independent GE Dryer Technicians, Wynne AR
Our data shows 39 appliance repair companies inside a 60-mile radius of Wynne. 1 list an address in Wynne, and other nearby bases include Memphis (10), Bartlett (4), and Searcy (3). The farthest listed company is about 60 miles out. No company within 60 miles of Wynne names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Vance Appliance Repair, around 1.2 miles out. The 37 rated companies in range average 3.9 stars. Wynne is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 16 |
|---|---|
| Distance to the three closest (mi) | 1.2, 15.3, 29.2 |
| Show laundry appliance work | 9 |
| Mention GE | 0 |
| Appliance repair companies in range (60 mi) | 39 |
| Open on Saturdays (per listing) | 18 |
First up for Wynne: Sears Appliance Repair (69.1 miles away, based in Blytheville, 4.4 stars from 25 reviews, lists Saturday hours); Vance Appliance Repair (1.2 miles away, 3.7 stars from 32 reviews); Sears Appliance Repair (56.3 miles away, based in Memphis, 4.6 stars from 941 reviews, lists Saturday hours); Sears Appliance Repair (41.2 miles away, based in Jonesboro, 4.5 stars from 54 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
What Makes GE Dryer Repairs Different
An electric GE dryer receiving only partial (120V) power from its 240V circuit can tumble normally but produce no heat, and a dryer wired to a 120V circuit can take up to three times longer to dry. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
What GE Says to Check First
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Squealing, thumping or grinding while it runs
- Cycles take two or three runs to finish
- Dryer shuts off a few minutes into the cycle
Inside a Dryer Repair Visit
Keeping a GE Dryer Running
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- How long the vent run is and where it exits the house
Dryer Notes for Wynne, AR
Most dryer calls in Wynne come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Arkansas has no separate appliance repair license, and household appliances are listed as exempt equipment under the state HVACR licensing law, though exempt work must still meet HVACR rules and any local permit and inspection requirements. Source: Arkansas HVAC/R Statutes 2025, A.C.A. ยง 17-33-102 (Arkansas Department of Labor and Licensing)
Natural gas piping and equipment work is governed by the state plumbing and fuel gas codes, and gas fitters are licensed by the Arkansas Department of Health's Plumbing and Natural Gas program. Source: Plumbing & Natural Gas - Arkansas Department of Health
Before You Book in Wynne
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the vent and lint path as part of the visit?
- Can you look at the washer on the same visit if it is acting up too?
GE Dryer Repair FAQs: Wynne, AR
Which Wynne technicians work on GE?
Do you work for GE?
Why does my dryer take so long to dry?
Why does my GE dryer show an error code?
More Laundry Repair in Wynne, AR
GE Dryer Repair Near Wynne
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.