GE owners in Palmdale usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Palmdale, with those that mention GE first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Dryers Near Palmdale
We found 40 appliance repair companies within 30 miles of Palmdale. 6 of them are based in Palmdale itself, and the rest are spread across Santa Clarita (9), Lancaster (7), and La Cañada Flintridge (5). The farthest listed company is about 28 miles out. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. DJ Appliance Services is the nearest, roughly 1.2 miles from Palmdale. Rated companies nearby average 4.3 stars across 34 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 14 |
|---|---|
| Distance to the three closest (mi) | 1.2, 1.2, 2.9 |
| Listing Saturday hours | 52 |
| Mention GE | 0 |
| List dryer or washer & dryer work | 8 |
| Companies within 30 miles | 60 |
First up for Palmdale: ABS Thermador & GE Monogram Appliance Repair (78.7 miles away, based in Laguna Beach, 5.0 stars from 10 reviews, lists Saturday hours); Sears Appliance Repair (2.9 miles away, 4.7 stars from 257 reviews, lists Saturday hours); Jeff & Sons appliance repair (6.3 miles away, based in Lancaster, 4.0 stars from 43 reviews, lists Saturday hours); Allen & Sons Appliance (6.5 miles away, 3.0 stars from 7 reviews, lists Saturday hours).
GE Dryer Lines and Features
What Makes GE Dryer Repairs Different
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Symptoms and First Checks
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Cycles take two or three runs to finish
- Clothes still damp after a full cycle
- Dryer will not start when you press Start
Inside a Dryer Repair Visit
Keeping a GE Dryer Running
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
Around Palmdale
Most dryer calls in Palmdale come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
Gas piping, gas appliance connections and gas safety devices fall within the C-36 Plumbing Contractor classification licensed by the Contractors State License Board. Source: C-36 - Plumbing Contractor, Licensing Classifications Detail - CSLB
Questions to Ask a Palmdale Technician
- If a part has to be ordered, how soon can you come back to finish?
- Can you look at the washer on the same visit if it is acting up too?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Palmdale, CA
Why do my clothes come out damp?
Do you work for GE?
How do I find a technician who knows GE dryers?
What makes a dryer stop heating?
Other Dryer Repair in Palmdale
GE Dryer Repair Near Palmdale
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.