A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Templeton
We found 17 appliance repair companies within 60 miles of Templeton. Other nearby bases include Santa Maria (7), San Luis Obispo (4), and Paso Robles (2). None of the companies within 60 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Nearest on the list: Idler's Home, around 2.2 miles out. The 15 rated companies in range average 4.2 stars. Because the nearest shops are farther out, ask each company whether Templeton is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Three nearest companies, miles away | 2.2, 4.4, 5.3 |
| Show laundry appliance work | 8 |
| Open on Saturdays (per listing) | 12 |
| Companies within 60 miles | 17 |
| Rated 4.5 stars or higher (10+ reviews) | 6 |
First up for Templeton: Sears Appliance Repair (73.9 miles away, based in Lemoore, 4.3 stars from 103 reviews, lists Saturday hours); Idler's Home (2.2 miles away, based in Paso Robles, 4.6 stars from 319 reviews, lists Saturday hours); Sears Appliance Repair (4.4 miles away, based in Atascadero, 4.6 stars from 241 reviews, lists Saturday hours); Sears Appliance Repair (20.6 miles away, based in San Luis Obispo, 4.4 stars from 88 reviews, lists Saturday hours).
Know Your GE Dryer
What a GE Dryer Technician Deals With
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Symptoms and First Checks
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Burning or hot smell during a cycle
- Dryer will not start when you press Start
- Drum will not turn even though you hear a hum
Inside a Dryer Repair Visit
Keeping a GE Dryer Running
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
Local Notes for Templeton
Most dryer calls in Templeton come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
Gas piping, gas appliance connections and gas safety devices fall within the C-36 Plumbing Contractor classification licensed by the Contractors State License Board. Source: C-36 - Plumbing Contractor, Licensing Classifications Detail - CSLB
Before You Book in Templeton
- What guarantee do you give on parts and labor?
- Will you check the vent and lint path as part of the visit?
- Do you work on gas dryers, and who handles anything involving the gas line?
GE Dryer Repair FAQs: Templeton, CA
Why does my GE dryer show an error code?
Why does my dryer take so long to dry?
Is my GE dryer worth repairing?
Related Repair Pages for Templeton
GE Dryer Repair in Nearby Cities
Write down any error code your GE dryer shows and when it appears. It helps a Templeton technician bring the right parts.