If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The Riverside list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Dryer Technicians, Riverside CT
Within 30 miles of Riverside there are 40 appliance repair companies in our data. Other nearby bases include Stamford (9), Norwalk (7), and White Plains (3). The farthest listed company is about 14 miles out. None of the repair companies near Riverside name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is E.T Appliance Repair Service Connecticut, about 1.9 miles away. Rated companies nearby average 4.3 stars across 30 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| List dryer or washer & dryer work | 16 |
|---|---|
| Three nearest companies, miles away | 1.9, 2.5, 2.6 |
| Listing Saturday hours | 34 |
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 17 |
| Appliance repair companies in range (30 mi) | 60 |
At the top of the Riverside list: Mr. Appliance of Fairfield CT (6.5 miles away, based in Stamford, 4.9 stars from 1,199 reviews, lists Saturday hours); 3rd Person Appliance Repair (3.0 miles away, based in Stamford, 5.0 stars from 386 reviews, lists Saturday hours); Mr. Appliance of Scarsdale-Mount Kisco-Brewster (10.0 miles away, based in White Plains, 4.6 stars from 721 reviews, lists Saturday hours); American Service (13.7 miles away, based in Huntington, 4.9 stars from 85 reviews, lists Saturday hours).
GE Dryer Lines and Features
What a GE Dryer Technician Deals With
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Symptoms and First Checks
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Drum turns but the air stays cool
- Drum will not turn even though you hear a hum
- Squealing, thumping or grinding while it runs
What Gets Fixed on a Riverside Dryer Call
Care GE Recommends for Its Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
Dryer Notes for Riverside, CT
Most dryer calls in Riverside come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Connecticut's Department of Consumer Protection does not list a separate appliance repair license; work on gas piping, approved gas appliances and refrigeration systems falls under its heating, piping and cooling license categories. Source: Heating Piping and Cooling License Types and Scope of Work (CT Department of Consumer Protection)
Installing, repairing and maintaining gas piping and approved gas appliances requires a state heating, piping and cooling license (such as the G-1/G-2 gas license or a broader B, D or S license) issued through the Department of Consumer Protection. Source: Heating Piping and Cooling License Types and Scope of Work (CT Department of Consumer Protection)
How to Choose a Dryer Technician Near Riverside
- Do you work on gas dryers, and who handles anything involving the gas line?
- Can you give a written estimate before ordering parts?
- If a part has to be ordered, how soon can you come back to finish?
GE Dryer Repair FAQs: Riverside, CT
What should I do about a GE error code?
Do you work for GE?
How do I find a technician who knows GE dryers?
What makes a dryer stop heating?
Related Repair Pages for Riverside
GE Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.