Most GE dryer repairs in Jerome involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Dryer Repair Near Jerome
We found 6 appliance repair companies within 60 miles of Jerome. Other nearby bases include Twin Falls (3), Hailey (2), and Rupert (1). Distances run up to about 57 miles. Wilder Appliance is the nearest, roughly 11.4 miles from Jerome. None of the repair companies near Jerome name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Across 6 rated companies, the average public rating is 4.8 stars. Because the nearest shops are farther out, ask each company whether Jerome is inside its regular service area.
Companies are shown by relevance and distance from Jerome. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Mention GE | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 4 |
| List dryer or washer & dryer work | 1 |
| Companies within 60 miles | 6 |
| Three nearest companies, miles away | 11.4, 12.2, 12.9 |
| Listing Saturday hours | 1 |
First up for Jerome: Pro-Tech Service (12.2 miles away, based in Twin Falls, 4.4 stars from 138 reviews); Wilder Appliance (11.4 miles away, based in Twin Falls, 4.9 stars from 30 reviews); Hartman's Appliance Repair. (12.9 miles away, based in Twin Falls, 4.7 stars from 83 reviews, lists Saturday hours); Doyle's Appliance Service LLC (41.7 miles away, based in Rupert, 4.8 stars from 55 reviews).
Know Your GE Dryer
What a GE Dryer Technician Deals With
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
An electric GE dryer receiving only partial (120V) power from its 240V circuit can tumble normally but produce no heat, and a dryer wired to a 120V circuit can take up to three times longer to dry. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
Common GE Dryer Problems
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Squealing, thumping or grinding while it runs
- Drum turns but the air stays cool
- Clothes still damp after a full cycle
What a Dryer Repair Technician Checks
Care GE Recommends for Its Dryers
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- Any error code on the display
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Local Notes for Jerome
Most dryer calls in Jerome come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Idaho's Division of Occupational and Professional Licenses does not list appliance repair as a licensed profession; gas piping and gas appliance work falls under the state's HVAC licensing, which includes specialty licenses for those trades. Source: Is My Profession Licensed? - Idaho DOPL
In Idaho, you can check a license with the Idaho DOPL Search for a License or Registration or report a problem to the Idaho Attorney General Consumer Protection Division.
How to Choose a Dryer Technician Near Jerome
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Dryer Repair FAQs: Jerome, ID
Is this GE customer service?
Why is my dryer running but not heating?
What should I do about a GE error code?
Is my GE dryer worth repairing?
Other Dryer Repair in Jerome
GE Dryer Repair in Nearby Cities
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.