Most GE dryer repairs in Coeur d'Alene involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Independent GE Dryer Technicians, Coeur d'Alene ID
We found 32 appliance repair companies within 30 miles of Coeur d'Alene. 3 of them are based in Coeur d'Alene itself, and other nearby bases include Spokane (13), Spokane Valley (8), and Dalton Gardens (2). Distances run up to about 30 miles. Nearest on the list: Northern Appliance, around 1.9 miles out. No company within 90 miles of Coeur d'Alene mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 29 rated companies, the average public rating is 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Show laundry appliance work | 14 |
|---|---|
| Distance to the three closest (mi) | 1.9, 1.9, 2.0 |
| Mention GE | 0 |
| Companies within 30 miles | 32 |
| With 4.5+ stars and at least 10 reviews | 20 |
| Open on Saturdays (per listing) | 21 |
At the top of the Coeur d'Alene list: Pillar, Heating Air Appliance (2.0 miles away, based in Dalton Gardens, 5.0 stars from 533 reviews); Allway Service Appliance repair & Refrigeration repair (17.7 miles away, based in Spokane Valley, 4.9 stars from 495 reviews, lists Saturday hours); Allway Service LLC (2.5 miles away, 4.9 stars from 56 reviews, lists Saturday hours); Mr. Appliance of Spokane Valley (21.9 miles away, based in Spokane Valley, 5.0 stars from 46 reviews, lists Saturday hours).
GE Dryer Lines and Features
How GE Dryers Are Built
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
Common GE Dryer Problems
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Drum turns but the air stays cool
- Dryer will not start when you press Start
- Cycles take two or three runs to finish
How a Dryer Service Call Usually Goes in Coeur d'Alene
Keeping a GE Dryer Running
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Around Coeur d'Alene
Most dryer calls in Coeur d'Alene come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Idaho's Division of Occupational and Professional Licenses does not list appliance repair as a licensed profession; gas piping and gas appliance work falls under the state's HVAC licensing, which includes specialty licenses for those trades. Source: Is My Profession Licensed? - Idaho DOPL
Idaho treats gas piping, gas appliances and their venting as HVAC work licensed by the state through DOPL, with specialty HVAC licenses available for gas piping or gas appliances alone and a limited heating specialty for propane-fired appliances. Source: Idaho Code Section 54-5003, Definitions (HVAC)
Questions to Ask a Coeur d'Alene Technician
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on gas dryers, and who handles anything involving the gas line?
- Will you check the vent and lint path as part of the visit?
GE Dryer Repair FAQs: Coeur d'Alene, ID
Which Coeur d'Alene technicians work on GE?
Should I repair or replace my GE dryer?
Is this GE customer service?
Why is my dryer running but not heating?
Related Repair Pages for Coeur d'Alene
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.