GE owners in Boise usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Boise, with those that mention GE first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Who Works on GE Dryers Near Boise
40 repair companies serve Boise from within 30 miles. 22 list an address in Boise, and the rest are spread across Nampa (8), Meridian (6), and Eagle (2). Western Boise Appliance Repair is the nearest, roughly 0.2 miles from Boise. No company within 90 miles of Boise mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 37 rated companies in range average 4.7 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Appliance repair companies in range (30 mi) | 49 |
|---|---|
| List dryer or washer & dryer work | 12 |
| Open on Saturdays (per listing) | 30 |
| Distance to the three closest (mi) | 0.2, 0.8, 0.9 |
| Rated 4.5 stars or higher (10+ reviews) | 19 |
| Mention GE | 0 |
At the top of the Boise list: Western Boise Appliance Repair (0.2 miles away, 4.9 stars from 84 reviews); Mr. Appliance of Southwest Idaho (18.2 miles away, based in Nampa, 4.9 stars from 1,198 reviews); Western Appliance Repair (6.9 miles away, 4.9 stars from 95 reviews, lists Saturday hours); Major Appliance Repair Service Inc (4.5 miles away, 4.7 stars from 55 reviews).
Know Your GE Dryer
What Makes GE Dryer Repairs Different
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Symptoms and First Checks
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Burning or hot smell during a cycle
- Dryer will not start when you press Start
- Squealing, thumping or grinding while it runs
What Gets Fixed on a Boise Dryer Call
Owner Care for GE Dryers
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
Local Notes for Boise
Most dryer calls in Boise come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Idaho's Division of Occupational and Professional Licenses does not list appliance repair as a licensed profession; gas piping and gas appliance work falls under the state's HVAC licensing, which includes specialty licenses for those trades. Source: Is My Profession Licensed? - Idaho DOPL
In Idaho, you can check a license with the Idaho DOPL Search for a License or Registration or report a problem to the Idaho Attorney General Consumer Protection Division.
How to Choose a Dryer Technician Near Boise
- What guarantee do you give on parts and labor?
- Do you work on gas dryers, and who handles anything involving the gas line?
- If a part has to be ordered, how soon can you come back to finish?
GE Dryer Repair FAQs: Boise, ID
What should I do about a GE error code?
Is this GE customer service?
Which Boise technicians work on GE?
Is my GE dryer worth repairing?
More Laundry Repair in Boise, ID
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.