If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. The Nampa list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Independent GE Dryer Technicians, Nampa ID
40 repair companies serve Nampa from within 30 miles. 8 list an address in Nampa, and the rest are spread across Boise (15), Caldwell (7), and Meridian (6). Distances run up to about 16 miles. None of the repair companies near Nampa name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Nearest on the list: Nampa Affordable Appliance Repair Tech, around 0.2 miles out. Rated companies nearby average 4.7 stars across 39 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 0.2, 1.0, 1.5 |
|---|---|
| Companies within 30 miles | 51 |
| Mention GE | 0 |
| List dryer or washer & dryer work | 12 |
| With 4.5+ stars and at least 10 reviews | 19 |
| Open on Saturdays (per listing) | 32 |
Closest matches for Nampa: Mr. Appliance of Southwest Idaho (2.0 miles away, 4.9 stars from 1,198 reviews); Western Appliance Repair (11.4 miles away, based in Boise, 4.9 stars from 95 reviews, lists Saturday hours); Sears Appliance Repair (2.6 miles away, 4.7 stars from 26 reviews, lists Saturday hours); Western Boise Appliance Repair (16.5 miles away, based in Boise, 4.9 stars from 84 reviews).
GE Dryer Features Technicians Work On
What Makes GE Dryer Repairs Different
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Symptoms and First Checks
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Dryer shuts off a few minutes into the cycle
- Cycles take two or three runs to finish
- Dryer will not start when you press Start
Inside a Dryer Repair Visit
Care GE Recommends for Its Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- Any error code on the display
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
Local Notes for Nampa
Most dryer calls in Nampa come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Idaho's Division of Occupational and Professional Licenses does not list appliance repair as a licensed profession; gas piping and gas appliance work falls under the state's HVAC licensing, which includes specialty licenses for those trades. Source: Is My Profession Licensed? - Idaho DOPL
Idaho treats gas piping, gas appliances and their venting as HVAC work licensed by the state through DOPL, with specialty HVAC licenses available for gas piping or gas appliances alone and a limited heating specialty for propane-fired appliances. Source: Idaho Code Section 54-5003, Definitions (HVAC)
Questions to Ask a Nampa Technician
- Can you give a written estimate before ordering parts?
- Do you work on gas dryers, and who handles anything involving the gas line?
- Will you check the vent and lint path as part of the visit?
GE Dryer Repair FAQs: Nampa, ID
Why does my dryer take so long to dry?
Why does my GE dryer show an error code?
What makes a dryer stop heating?
Related Repair Pages for Nampa
GE Dryer Repair in Nearby Cities
Write down any error code your GE dryer shows and when it appears. It helps a Nampa technician bring the right parts.