Most GE dryer repairs in Post Falls involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Post Falls
38 repair companies serve Post Falls from within 30 miles. 2 of them are based in Post Falls itself, and other nearby bases include Spokane (18), Spokane Valley (8), and Coeur d'Alene (3). The closest is Local Appliance Repair Service Post Falls, about 0.4 miles away. None of the repair companies near Post Falls name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The 34 rated companies in range average 4.6 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Distance to the three closest (mi) | 0.4, 2.8, 5.0 |
|---|---|
| Open on Saturdays (per listing) | 26 |
| List dryer or washer & dryer work | 16 |
| Mention GE | 0 |
| Appliance repair companies in range (30 mi) | 38 |
| Rated 4.5 stars or higher (10+ reviews) | 25 |
First up for Post Falls: Allway Service Appliance repair & Refrigeration repair (11.6 miles away, based in Spokane Valley, 4.9 stars from 495 reviews, lists Saturday hours); Pillar, Heating Air Appliance (7.1 miles away, based in Dalton Gardens, 5.0 stars from 533 reviews); Allway Service LLC (8.7 miles away, based in Coeur d'Alene, 4.9 stars from 56 reviews, lists Saturday hours); Mr. Appliance of Spokane Valley (15.6 miles away, based in Spokane Valley, 5.0 stars from 46 reviews, lists Saturday hours).
Know Your GE Dryer
What Makes GE Dryer Repairs Different
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
What GE Says to Check First
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Dryer shuts off a few minutes into the cycle
- Clothes still damp after a full cycle
- Burning or hot smell during a cycle
Inside a Dryer Repair Visit
Keeping a GE Dryer Running
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
Around Post Falls
Most dryer calls in Post Falls come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Idaho's Division of Occupational and Professional Licenses does not list appliance repair as a licensed profession; gas piping and gas appliance work falls under the state's HVAC licensing, which includes specialty licenses for those trades. Source: Is My Profession Licensed? - Idaho DOPL
Idaho treats gas piping, gas appliances and their venting as HVAC work licensed by the state through DOPL, with specialty HVAC licenses available for gas piping or gas appliances alone and a limited heating specialty for propane-fired appliances. Source: Idaho Code Section 54-5003, Definitions (HVAC)
Questions to Ask a Post Falls Technician
- Will you check the vent and lint path as part of the visit?
- Do you work on gas dryers, and who handles anything involving the gas line?
- Can you look at the washer on the same visit if it is acting up too?
GE Dryer Repair FAQs: Post Falls, ID
Why does my GE dryer show an error code?
Is this GE customer service?
Why do my clothes come out damp?
Which Post Falls technicians work on GE?
Other Dryer Repair in Post Falls
GE Dryer Repair Near Post Falls
Write down any error code your GE dryer shows and when it appears. It helps a Post Falls technician bring the right parts.