Serving Newton, Kansas and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

GE Dryer Repair in Newton, KS

A local list of independent GE dryer technicians for Newton and the Harvey County area, plus a helpline that connects you with one.

Need GE dryer repair near Newton?
Call our helpline to be connected with an independent technician who repairs GE dryers.
☎(888) 772-9805
✓10 companies listed for Newton✓Independent, not a manufacturer✓Public ratings & distances

A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Newton, with those that mention GE first, then the nearest dryer repair companies.

Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.

Who Works on GE Dryers Near Newton

Our data shows 39 appliance repair companies inside a 30-mile radius of Newton. 1 of them are based in Newton itself, and the rest are spread across Wichita (32), Park City (1), and Bel Aire (1). The farthest listed company is about 30 miles out. Nearest on the list: Sears Appliance Repair, around 0.8 miles out. No company within 30 miles of Newton names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.5 stars across 19 businesses.

Mentions GE
Sears Appliance Repair
300 S Main St, Pratt, KS 67124
80.8 mi from Newton
★★★★★ 4.8 (23 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Wichita
257 East 53rd St N, Park City, KS 67219
17.7 mi from Newton
★★★★★ 4.9 (1,234 reviews)
DryersWashers
Washer & Dryer Repair
Sears Appliance Repair
505 N Poplar St, Newton, KS 67114
0.8 mi from Newton
★★★★½ 4.6 (265 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Appliance Nerd
1632 S West St Ste 5, Wichita, KS 67213
25.8 mi from Newton
★★★★★ 4.9 (56 reviews)
DryersWashers
Appliance Repair
Able and Ready Appliance Repair
605 W Kopplin St, Wichita, KS 67204
19.5 mi from Newton
★★★★★ 4.8 (114 reviews)
Saturday hours
Appliance Repair
Rick's Appliance Services
1617 W Harry St, Wichita, KS 67213
25.7 mi from Newton
★★★★½ 4.7 (664 reviews)
Washer & Dryer Repair
Larry's Appliance Repair
1625 W Harry St, Wichita, KS 67213
25.6 mi from Newton
★★★½ 3.5 (32 reviews)
DryersWashers
Appliance Repair
Commercial Cooking Services LLC.
1710 S Laura St, Wichita, KS 67211
25.9 mi from Newton
★★★★★ 5.0 (42 reviews)
Commercial
Appliance Repair
Appliance Tech
911 S Main St, McPherson, KS 67460
28.4 mi from Newton
★★★★★ 4.8 (30 reviews)
Saturday hours
Appliance Repair
Appliance Doctor Inc
1123 E Pawnee St, Wichita, KS 67211
26.8 mi from Newton
★★★★★ 5.0 (5 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

By the numbers: technicians near Newton
Open on Saturdays (per listing)29
Appliance repair companies in range (30 mi)39
Three nearest companies, miles away0.8, 17.5, 17.7
Show laundry appliance work4
Mention GE0
Rated 4.5 stars or higher (10+ reviews)8

First up for Newton: Sears Appliance Repair (80.8 miles away, based in Pratt, 4.8 stars from 23 reviews, lists Saturday hours); Mr. Appliance of Wichita (17.7 miles away, based in Park City, 4.9 stars from 1,234 reviews); Sears Appliance Repair (0.8 miles away, 4.6 stars from 265 reviews, lists Saturday hours); Appliance Nerd (25.8 miles away, based in Wichita, 4.9 stars from 56 reviews).

⚡ Get connected with a GE dryer technician near Newton
☎(888) 772-9805

GE Dryer Features Technicians Work On

GE Profile Smart Front Load Dryers with Steam and SanitizeLarge-capacity front-load dryers with steam, a sanitize cycle and SmartHQ app connectivity.
GE Profile UltraFast ComboAn all-in-one washer/dryer that dries with ventless inverter heat pump technology, so it needs no outside vent and runs on a 120V plug.

What Makes GE Dryer Repairs Different

Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert

Common GE Dryer Problems

  • Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
  • Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat

What GE Dryer Codes Mean

CodeWhat it means
353 (UltraFast Combo)The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
Check and Clean Drain Pump Filter (UltraFast Combo)A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
Confirm H2O Supply is ON (UltraFast Combo)No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages

Signs Your GE Dryer Needs a Technician

  • Dryer will not start when you press Start
  • Clothes still damp after a full cycle
  • Drum will not turn even though you hear a hum

How a Dryer Service Call Usually Goes in Newton

Door switch and start circuitA dryer that does nothing when Start is pressed may have a failed door switch, start switch, fuse or control board. Checking power at the outlet comes first, since an electric dryer needs both legs of a 240-volt circuit to heat.
Moisture sensor and controlsSensor-dry cycles stop when two metal strips inside the drum read dry clothes. Fabric-softener film on those strips can end cycles early or let them run long, and a technician checks them before blaming the control board.

Owner Care for GE Dryers

Brand guides: GE Dryer Not Heating: What to Check.

GE Dryer Repair Cost Ranges

A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:

If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Before the Technician Arrives

  • Whether the dryer is gas or electric
  • Any error code on the display
  • How long the vent run is and where it exits the house

Around Newton

Most dryer calls in Newton come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Kansas leaves contractor and trade licensing, including plumbing and HVAC, to cities and counties, so who may do gas piping and gas appliance connections depends on the local jurisdiction. Source: Kansas Business Center: Business Starter Kit, Construction

In Kansas, you can report a problem to the Kansas Attorney General Public Protection Division (Consumer Protection).

How to Choose a Dryer Technician Near Newton

  • Can you look at the washer on the same visit if it is acting up too?
  • Can you give a written estimate before ordering parts?
  • If a part has to be ordered, how soon can you come back to finish?

GE Dryer Repair FAQs: Newton, KS

Do you work for GE?
No. We are an independent directory and are not affiliated with GE. The companies listed are independent technicians. For manufacturer coverage questions, contact GE directly.
What makes a dryer stop heating?
On an electric dryer the usual suspects are the heating element, a blown thermal fuse, a failed thermostat or a tripped breaker on one leg of the circuit. On a gas dryer, check that the gas is on, then the igniter and valve coils. A blocked vent can trip the safety fuse on both types, so it should be cleared first.
Why does my dryer take so long to dry?
Restricted airflow is the most common cause: a full lint screen, a crushed or kinked duct, or a clogged exhaust hood outside. Overloading and a dirty moisture sensor are next. If the vent is clear and the dryer still runs long, a technician can test the heating parts.

More Laundry Repair in Newton, KS

GE Dryer Repair Near Newton

Write down any error code your GE dryer shows and when it appears. It helps a Newton technician bring the right parts.

One call to a GE dryer technician near you
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech