GE owners in Aberdeen usually want two things from a repair company: experience with the brand and quick access to parts. The Aberdeen list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Independent GE Dryer Technicians, Aberdeen MD
We found 40 appliance repair companies within 30 miles of Aberdeen. Other nearby bases include Baltimore (9), Bel Air (6), and Parkville (4). The farthest listed company is about 25 miles out. Nearest on the list: Titus Appliance Repair, around 5.0 miles out. No company within 30 miles of Aberdeen names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 39 rated companies in range average 4.0 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 34 |
|---|---|
| Show laundry appliance work | 18 |
| Distance to the three closest (mi) | 5.0, 7.7, 8.0 |
| Mention GE | 0 |
| Repair companies inside 30 miles | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 23 |
The leading options for Aberdeen are District-Columbia Hotpoint Rpr (63.0 miles away, based in Washington, 5.0 stars from 4 reviews, lists Saturday hours); Sears Appliance Repair (9.9 miles away, based in Bel Air, 4.7 stars from 491 reviews, lists Saturday hours); Beyond Appliances Repair Services LLC (10.8 miles away, based in Bel Air, 4.7 stars from 233 reviews); Landers Appliance (21.1 miles away, based in Baltimore, 4.9 stars from 2,398 reviews).
GE Dryer Lines and Features
How GE Dryers Are Built
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Symptoms and First Checks
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Drum will not turn even though you hear a hum
- Dryer shuts off a few minutes into the cycle
- Drum turns but the air stays cool
How a Dryer Service Call Usually Goes in Aberdeen
Keeping a GE Dryer Running
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Any error code on the display
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
Local Notes for Aberdeen
Most dryer calls in Aberdeen come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
The Maryland Board of Plumbing issues master, journey and apprentice natural gas fitter licenses and a propane gas fitter certificate, and recognizes certain Baltimore County and WSSC gas fitter licenses. Source: Md. Code, Business Occupations and Professions ยง 12-302 (Maryland General Assembly)
How to Choose a Dryer Technician Near Aberdeen
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
- How often do you repair GE dryers, and do you carry common parts on the truck?
GE Dryer Repair FAQs: Aberdeen, MD
Do you work for GE?
What should I do about a GE error code?
What makes a dryer stop heating?
How do I find a technician who knows GE dryers?
Other Dryer Repair in Aberdeen
More GE Dryer Repair Pages Nearby
Write down any error code your GE dryer shows and when it appears. It helps a Aberdeen technician bring the right parts.