GE owners in Clarksdale usually want two things from a repair company: experience with the brand and quick access to parts. The Clarksdale list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Who Works on GE Dryers Near Clarksdale
We found 12 appliance repair companies within 60 miles of Clarksdale. 2 of them are based in Clarksdale itself, and the rest are spread across Greenwood (2), Oxford (2), and West Helena (1). Distances run up to about 60 miles. Nearest on the list: Sears Appliance Repair, around 1.3 miles out. None of the repair companies near Clarksdale name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The 11 rated companies in range average 4.3 stars. Clarksdale is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| List dryer or washer & dryer work | 3 |
|---|---|
| Three nearest companies, miles away | 1.3, 5.0, 26.0 |
| Rated 4.5 stars or higher (10+ reviews) | 2 |
| Repair companies inside 60 miles | 12 |
| Mention GE | 0 |
| Listing Saturday hours | 7 |
First up for Clarksdale: Sears Appliance Repair (1.3 miles away, 4.3 stars from 60 reviews, lists Saturday hours); Sears Appliance Repair (51.9 miles away, based in Grenada, 3.8 stars from 23 reviews, lists Saturday hours); Clarksdale Appliance Services Inc. (5.0 miles away, 3.2 stars from 9 reviews); Sears Appliance Repair (51.0 miles away, based in Greenwood, 3.9 stars from 7 reviews, lists Saturday hours).
GE Dryer Lines and Features
How GE Dryers Are Built
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
GE Dryer Symptoms and First Checks
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Dryer will not start when you press Start
- Dryer shuts off a few minutes into the cycle
- Clothes still damp after a full cycle
How a Dryer Service Call Usually Goes in Clarksdale
Care GE Recommends for Its Dryers
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- Any error code on the display
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
Dryer Notes for Clarksdale, MS
Most dryer calls in Clarksdale come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Mississippi's State Board of Contractors has no appliance repair classification; it licenses mechanical, HVAC and plumbing contractors, with residential mechanical and plumbing subcontractors required to hold a license. Source: MSBOC: Classifications
In Mississippi, you can check a license with the MSBOC Check A License or report a problem to the Mississippi Attorney General's Office, Consumer Protection Division.
Before You Book in Clarksdale
- What guarantee do you give on parts and labor?
- Do you work on gas dryers, and who handles anything involving the gas line?
- Will you check the vent and lint path as part of the visit?
GE Dryer Repair FAQs: Clarksdale, MS
Why does my GE dryer show an error code?
Why do my clothes come out damp?
Is this GE customer service?
What makes a dryer stop heating?
More Laundry Repair in Clarksdale, MS
GE Dryer Repair Near Clarksdale
Write down any error code your GE dryer shows and when it appears. It helps a Clarksdale technician bring the right parts.