Most GE dryer repairs in Tabor City involve the same few systems: heat, airflow, the drum drive and the controls. The Tabor City list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Tabor City
Within 30 miles of Tabor City there are 21 appliance repair companies in our data. 1 list an address in Tabor City, and the rest are spread across North Myrtle Beach (5), Conway (4), and Little River (3). Distances run up to about 30 miles. Nearest on the list: Sears Appliance Repair, around 6.2 miles out. No company within 30 miles of Tabor City names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.4 stars across 19 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Repair companies inside 30 miles | 21 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 12 |
| Open on Saturdays (per listing) | 12 |
| Mention GE | 0 |
| Three nearest companies, miles away | 6.2, 15.2, 16.3 |
| Show laundry appliance work | 5 |
First up for Tabor City: Sears Appliance Repair (81.4 miles away, based in Dunn, 4.6 stars from 128 reviews, lists Saturday hours); Sears Appliance Repair (6.2 miles away, based in Loris, 4.7 stars from 92 reviews, lists Saturday hours); Same Day Home Services (23.6 miles away, based in Little River, 4.9 stars from 60 reviews, lists Saturday hours); Appliance Defiance (25.3 miles away, based in North Myrtle Beach, 4.9 stars from 143 reviews).
Know Your GE Dryer
How GE Dryers Are Built
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
GE Dryer Symptoms and First Checks
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Cycles take two or three runs to finish
- Clothes still damp after a full cycle
- Outside of the cabinet gets unusually hot
How a Dryer Service Call Usually Goes in Tabor City
Care GE Recommends for Its Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
- Whether the dryer is gas or electric
Local Notes for Tabor City
Most dryer calls in Tabor City come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Hiring a Dryer Repair Company in Tabor City
- How often do you repair GE dryers, and do you carry common parts on the truck?
- Will you check the vent and lint path as part of the visit?
- Can you look at the washer on the same visit if it is acting up too?
GE Dryer Repair FAQs: Tabor City, NC
What should I do about a GE error code?
Why does my dryer take so long to dry?
Is this GE customer service?
How do I find a technician who knows GE dryers?
Other Dryer Repair in Tabor City
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.