If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. Below are independent repair companies serving Aloha, with those that mention GE first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Aloha
40 repair companies serve Aloha from within 30 miles. The rest are spread across Beaverton (11), Portland (11), and Hillsboro (6). The farthest listed company is about 9 miles out. No company within 30 miles of Aloha names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Exact Beaverton Appliance Repair Solutions, around 0.7 miles out. Rated companies nearby average 4.8 stars across 27 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Repair companies inside 30 miles | 60 |
|---|---|
| Open on Saturdays (per listing) | 39 |
| With 4.5+ stars and at least 10 reviews | 17 |
| Show laundry appliance work | 9 |
| Three nearest companies, miles away | 0.7, 1.5, 1.9 |
| Mention GE | 0 |
At the top of the Aloha list: Sears Appliance Repair (66.8 miles away, based in Hood River, 4.3 stars from 34 reviews, lists Saturday hours); Sears Appliance Repair (82.7 miles away, based in Chehalis, 4.4 stars from 134 reviews, lists Saturday hours); A&P Appliance Parts and Service (3.2 miles away, based in Beaverton, 4.7 stars from 257 reviews, lists Saturday hours); Mr. Appliance of Portland (7.5 miles away, based in Portland, 4.8 stars from 691 reviews, lists Saturday hours).
Know Your GE Dryer
What a GE Dryer Technician Deals With
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Dryer shuts off a few minutes into the cycle
- Burning or hot smell during a cycle
- Drum will not turn even though you hear a hum
Inside a Dryer Repair Visit
Care GE Recommends for Its Dryers
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
Around Aloha
Most dryer calls in Aloha come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)
Businesses that install, alter or repair LP gas appliances, piping or vent connections need an LP gas installation license, and the individuals doing the work need a fitter license, both from the Oregon State Fire Marshal; natural gas licensing was not confirmed. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)
Before You Book in Aloha
- How often do you repair GE dryers, and do you carry common parts on the truck?
- Can you look at the washer on the same visit if it is acting up too?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Aloha, OR
How do I find a technician who knows GE dryers?
Why does my dryer take so long to dry?
Is this GE customer service?
Related Repair Pages for Aloha
GE Dryer Repair Near Aloha
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.