Serving Four Corners, Oregon and nearby areas Helpline · (888) 772-9805
☎(888) 772-9805Call

GE Dryer Repair in Four Corners, OR

Independent repair companies near Four Corners that work on GE dryers, with companies that mention GE listed first.

Need GE dryer repair near Four Corners?
Call our helpline to be connected with an independent technician who repairs GE dryers.
☎(888) 772-9805
✓10 companies listed for Four Corners✓Independent, not a manufacturer✓Public ratings & distances

Most GE dryer repairs in Four Corners involve the same few systems: heat, airflow, the drum drive and the controls. The Four Corners list starts with companies that name GE, followed by other appliance repair companies that list dryer work.

This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.

Who Works on GE Dryers Near Four Corners

Our data shows 20 appliance repair companies inside a 30-mile radius of Four Corners. Other nearby bases include Salem (7), Albany (2), and McMinnville (2). Distances run up to about 30 miles. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Sears Appliance Repair is the nearest, roughly 1.0 miles from Four Corners. Rated companies nearby average 4.7 stars across 19 businesses.

Mentions GE
Sears Appliance Repair
1795 12th St, Hood River, OR 97031
88.2 mi from Four Corners
★★★★½ 4.3 (34 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
827 Lancaster Dr NE, Salem, OR 97301
1.0 mi from Four Corners
★★★★½ 4.3 (140 reviews)
DryersWashersSaturday hours
Washer & Dryer Repair
Krohn's Appliance Service LLC
2207 E Portland Rd # C, Newberg, OR 97132
25.9 mi from Four Corners
★★★★½ 4.6 (49 reviews)
DryersWashers
Washer & Dryer Repair
ATS Appliance Repair
2374 NW McGarey Dr, McMinnville, OR 97128
23.8 mi from Four Corners
★★★★★ 4.9 (395 reviews)
DryersWashersSaturday hours
Appliance Repair
Xigent Appliance Repair, Inc.
2225 Pacific Blvd SE #104, Albany, OR 97321
20.9 mi from Four Corners
★★★★★ 4.8 (1,237 reviews)
Appliance Repair
Appliance Hospital - Salem
3003 Alberta Ave NE, Salem, OR 97301
1.9 mi from Four Corners
★★★★½ 4.5 (226 reviews)
Washer & Dryer Repair
Sears Appliance Repair
400 NE Circle Blvd, Corvallis, OR 97330
27.3 mi from Four Corners
★★★★½ 4.5 (131 reviews)
DryersWashersSaturday hours
Appliance Repair
United Repair Co
1081 Broadway St NE, Salem, OR 97301
3.2 mi from Four Corners
★★★★½ 4.4 (140 reviews)
Saturday hours
Appliance Repair
Bogard Appliances and Refrigeration, LLC
1985 Park Ave NE, Salem, OR 97301
2.2 mi from Four Corners
★★★★★ 4.9 (100 reviews)
Appliance Repair
Givens Appliance Repair
256 Browning Ave SE, Salem, OR 97302
4.4 mi from Four Corners
★★★★★ 4.9 (87 reviews)

Companies are shown by relevance and distance from Four Corners. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.

Dryer repair near Four Corners at a glance
Mention GE0
Listing Saturday hours8
With 4.5+ stars and at least 10 reviews10
Show laundry appliance work4
Companies within 30 miles20
Distance to the three closest (mi)1.0, 1.2, 1.9

Closest matches for Four Corners: Sears Appliance Repair (88.2 miles away, based in Hood River, 4.3 stars from 34 reviews, lists Saturday hours); Sears Appliance Repair (1.0 miles away, based in Salem, 4.3 stars from 140 reviews, lists Saturday hours); Krohn's Appliance Service LLC (25.9 miles away, based in Newberg, 4.6 stars from 49 reviews); ATS Appliance Repair (23.8 miles away, based in McMinnville, 4.9 stars from 395 reviews, lists Saturday hours).

⚡ Call to reach an independent GE dryer tech
☎(888) 772-9805

GE Dryer Lines and Features

SmartHQ appGE Appliances' Wi-Fi app for managing smart laundry remotely, including cycle control and notifications such as a clogged lint filter on the Combo.
GE / GE Profile aluminized alloy drum dryers with Sensor DryTop-load-pair electric dryers with an aluminized alloy drum, a sanitize cycle and moisture-sensing Sensor Dry.

What Makes GE Dryer Repairs Different

The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning

GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue

Common GE Dryer Problems

  • Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
  • Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat

Reading a GE Dryer Error Code

CodeWhat it means
353 (UltraFast Combo)The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
Confirm H2O Supply is ON (UltraFast Combo)No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages
18 (UltraFast Combo)The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages

Signs Your GE Dryer Needs a Technician

  • Clothes still damp after a full cycle
  • Drum will not turn even though you hear a hum
  • Dryer will not start when you press Start

What Gets Fixed on a Four Corners Dryer Call

Power supplyElectric dryers run on a 240-volt circuit. A tripped breaker on one leg can leave the drum spinning with no heat, which is why a technician checks the outlet before ordering parts.
Drum belt, rollers and idler pulleySqueals, thumps and a drum that will not turn trace back to the belt, the drum support rollers, the idler pulley or the drum glides. These are wear parts and are often replaced together.

Keeping a GE Dryer Running

Brand guides: GE Dryer Not Heating: What to Check.

What GE Dryer Repairs Cost

A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:

If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?

Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.

Before the Technician Arrives

  • How long the vent run is and where it exits the house
  • What happens when you press Start (no response, hum, runs with no heat, stops early)
  • Whether the dryer is gas or electric

Local Notes for Four Corners

Most dryer calls in Four Corners come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.

Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)

In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.

Before You Book in Four Corners

  • Is your company licensed where my state requires it, and insured?
  • What is the service call or diagnostic fee, and is it applied to the repair?
  • If a part has to be ordered, how soon can you come back to finish?

GE Dryer Repair FAQs: Four Corners, OR

Why is my dryer running but not heating?
On an electric dryer the usual suspects are the heating element, a blown thermal fuse, a failed thermostat or a tripped breaker on one leg of the circuit. On a gas dryer, check that the gas is on, then the igniter and valve coils. A blocked vent can trip the safety fuse on both types, so it should be cleared first.
What should I do about a GE error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a blocked vent. If the code returns, a technician can test the part the code points to.
Why do my clothes come out damp?
Restricted airflow is the most common cause: a full lint screen, a crushed or kinked duct, or a clogged exhaust hood outside. Overloading and a dirty moisture sensor are next. If the vent is clear and the dryer still runs long, a technician can test the heating parts.

More Laundry Repair in Four Corners, OR

GE Dryer Repair in Nearby Cities

Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.

One call to a GE dryer technician near you
☎(888) 772-9805
☎ Call (888) 772-9805 Talk to a tech