Most GE dryer repairs in Jeannette involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Jeannette, with those that mention GE first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Jeannette
We found 40 appliance repair companies within 30 miles of Jeannette. 2 of them are based in Jeannette itself, and other nearby bases include Pittsburgh (11), Greensburg (2), and Irwin (2). The farthest listed company is about 21 miles out. No company within 90 miles of Jeannette mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Don's All Appliance Repair, about 0.1 miles away. Rated companies nearby average 4.1 stars across 33 businesses.
Companies are shown by relevance and distance from Jeannette. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Rated 4.5 stars or higher (10+ reviews) | 22 |
|---|---|
| Mention GE | 0 |
| Repair companies inside 30 miles | 60 |
| Three nearest companies, miles away | 0.1, 1.0, 3.5 |
| Open on Saturdays (per listing) | 47 |
| Show laundry appliance work | 14 |
Closest matches for Jeannette: Don's Appliances (4.0 miles away, based in North Huntingdon, 4.8 stars from 1,089 reviews, lists Saturday hours); Don's Appliances (18.8 miles away, based in Pittsburgh, 4.8 stars from 1,625 reviews, lists Saturday hours); Ross Appliance (10.6 miles away, based in Monroeville, 4.9 stars from 769 reviews, lists Saturday hours); Sears Appliance Repair (9.1 miles away, based in North Versailles Township, 4.4 stars from 397 reviews, lists Saturday hours).
Know Your GE Dryer
What Makes GE Dryer Repairs Different
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Common GE Dryer Problems
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Drum will not turn even though you hear a hum
- Outside of the cabinet gets unusually hot
- Dryer shuts off a few minutes into the cycle
How a Dryer Service Call Usually Goes in Jeannette
Owner Care for GE Dryers
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
- Any error code on the display
Around Jeannette
Most dryer calls in Jeannette come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Pennsylvania has no statewide license for appliance repair or for most construction trades; contractors doing home improvement work must register with the Attorney General, and some municipalities license trades such as plumbing. Source: Contractor Licensing (Pennsylvania Department of Labor & Industry)
There is no statewide plumbing or trade license in Pennsylvania, so any licensing for gas piping work is set by the municipality where the work happens (Philadelphia, for example, issues its own plumber licenses). Source: Contractor Licensing (Pennsylvania Department of Labor & Industry)
Before You Book in Jeannette
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
- How often do you repair GE dryers, and do you carry common parts on the truck?
GE Dryer Repair FAQs: Jeannette, PA
Do you work for GE?
Why do my clothes come out damp?
Which Jeannette technicians work on GE?
What should I do about a GE error code?
More Laundry Repair in Jeannette, PA
More GE Dryer Repair Pages Nearby
Write down any error code your GE dryer shows and when it appears. It helps a Jeannette technician bring the right parts.