Most GE dryer repairs in Burkburnett involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Independent GE Dryer Technicians, Burkburnett TX
Our data shows 10 appliance repair companies inside a 60-mile radius of Burkburnett. 1 of them are based in Burkburnett itself, and the rest are spread across Wichita Falls (3), Iowa Park (2), and Archer City (1). The farthest listed company is about 60 miles out. Of those, 1 mentions GE by name. Nearest on the list: Speedy's Service Center, around 1.3 miles out. Rated companies nearby average 4.4 stars across 9 businesses. Burkburnett is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (60 mi) | 10 |
|---|---|
| Mention GE | 1 |
| Show laundry appliance work | 5 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Three nearest companies, miles away | 1.3, 10.1, 10.3 |
| Listing Saturday hours | 6 |
Closest matches for Burkburnett: Sears Appliance Repair (59.7 miles away, based in Altus, 3.6 stars from 30 reviews, lists Saturday hours); Mr. Appliance of Wichita Falls (12.1 miles away, based in Wichita Falls, 4.8 stars from 186 reviews, lists Saturday hours); Schubert's Appliance Repair (10.1 miles away, based in Iowa Park, 4.5 stars from 42 reviews); Hamilton Appliance Service Inc. (12.3 miles away, based in Wichita Falls, 4.3 stars from 11 reviews).
Know Your GE Dryer
How GE Dryers Are Built
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Common GE Dryer Problems
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Cycles take two or three runs to finish
- Drum will not turn even though you hear a hum
- Squealing, thumping or grinding while it runs
Inside a Dryer Repair Visit
Owner Care for GE Dryers
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
- Any error code on the display
Around Burkburnett
Most dryer calls in Burkburnett come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
Gas piping counts as plumbing in Texas and requires a plumbing license, with an exemption for LP gas installers who hold a separate state LP gas license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §§1301.002, 1301.055 (Texas State Board of Plumbing Examiners)
How to Choose a Dryer Technician Near Burkburnett
- What guarantee do you give on parts and labor?
- How often do you repair GE dryers, and do you carry common parts on the truck?
- Can you look at the washer on the same visit if it is acting up too?
GE Dryer Repair FAQs: Burkburnett, TX
Which Burkburnett technicians work on GE?
Why does my dryer take so long to dry?
Why is my dryer running but not heating?
Is this GE customer service?
Other Dryer Repair in Burkburnett
GE Dryer Repair in Nearby Cities
Write down any error code your GE dryer shows and when it appears. It helps a Burkburnett technician bring the right parts.