Most GE dryer repairs in Four Corners involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Four Corners, with those that mention GE first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Four Corners
Our data shows 40 appliance repair companies inside a 30-mile radius of Four Corners. Other nearby bases include Sugar Land (18), Houston (13), and Richmond (6). Distances run up to about 6 miles. TwinFix Appliances Repair is the nearest, roughly 1.2 miles from Four Corners. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Across 33 rated companies, the average public rating is 4.5 stars.
Companies are shown by relevance and distance from Four Corners. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Companies within 30 miles | 60 |
|---|---|
| Show laundry appliance work | 18 |
| Three nearest companies, miles away | 1.2, 1.7, 1.7 |
| With 4.5+ stars and at least 10 reviews | 23 |
| Open on Saturdays (per listing) | 48 |
| Mention GE | 0 |
First up for Four Corners: Sears Appliance Repair (31.3 miles away, based in Alvin, 4.4 stars from 84 reviews, lists Saturday hours); Sears Appliance Repair (59.6 miles away, based in Liberty, 4.7 stars from 126 reviews, lists Saturday hours); Sears Appliance Repair (76.4 miles away, based in La Grange, 4.7 stars from 61 reviews, lists Saturday hours); Leader Appliance Repair (4.7 miles away, based in Richmond, 4.9 stars from 985 reviews, lists Saturday hours).
GE Dryer Lines and Features
How GE Dryers Are Built
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Symptoms and First Checks
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Cycles take two or three runs to finish
- Dryer shuts off a few minutes into the cycle
- Outside of the cabinet gets unusually hot
Inside a Dryer Repair Visit
Owner Care for GE Dryers
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Around Four Corners
Most dryer calls in Four Corners come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Four Corners Technician
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Four Corners, TX
Is my GE dryer worth repairing?
Why does my GE dryer show an error code?
Why does my dryer take so long to dry?
Do you work for GE?
Other Dryer Repair in Four Corners
GE Dryer Repair Near Four Corners
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.