Most GE dryer repairs in Midvale involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Midvale, with those that mention GE first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Midvale
Within 30 miles of Midvale there are 40 appliance repair companies in our data. 6 list an address in Midvale, and other nearby bases include Sandy (14), West Jordan (7), and Taylorsville (3). The farthest listed company is about 5 miles out. No company within 30 miles of Midvale names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Quality Midvale Appliance Repair is the nearest, roughly 0.4 miles from Midvale. Across 23 rated companies, the average public rating is 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Appliance repair companies in range (30 mi) | 60 |
| List dryer or washer & dryer work | 10 |
| Three nearest companies, miles away | 0.4, 0.4, 0.8 |
| With 4.5+ stars and at least 10 reviews | 13 |
| Listing Saturday hours | 40 |
At the top of the Midvale list: General Electric Appliance (9.8 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); PowerClean Appliance Repair (1.9 miles away, 4.9 stars from 949 reviews, lists Saturday hours); Trusty Appliance Repair (1.8 miles away, based in Sandy, 4.9 stars from 313 reviews, lists Saturday hours); Famous Appliance Service (1.3 miles away, 4.6 stars from 805 reviews).
GE Dryer Lines and Features
What Makes GE Dryer Repairs Different
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Common GE Dryer Problems
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Dryer will not start when you press Start
- Squealing, thumping or grinding while it runs
- Clothes still damp after a full cycle
What a Dryer Repair Technician Checks
Care GE Recommends for Its Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
Local Notes for Midvale
Most dryer calls in Midvale come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Midvale
- What is the service call or diagnostic fee, and is it applied to the repair?
- Will you check the vent and lint path as part of the visit?
- Is your company licensed where my state requires it, and insured?
GE Dryer Repair FAQs: Midvale, UT
Should I repair or replace my GE dryer?
Which Midvale technicians work on GE?
Why does my dryer take so long to dry?
More Laundry Repair in Midvale, UT
GE Dryer Repair in Nearby Cities
Write down any error code your GE dryer shows and when it appears. It helps a Midvale technician bring the right parts.