Most GE dryer repairs in Woods Cross involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Who Works on GE Dryers Near Woods Cross
Our data shows 40 appliance repair companies inside a 30-mile radius of Woods Cross. 2 list an address in Woods Cross, and other nearby bases include Salt Lake City (21), South Salt Lake (6), and North Salt Lake (2). Of those, 1 mentions GE by name. The closest is Woods Cross Elvarix Appliance Repair Service, about 0.7 miles away. Rated companies nearby average 4.6 stars across 30 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention GE | 1 |
|---|---|
| Show laundry appliance work | 5 |
| Appliance repair companies in range (30 mi) | 60 |
| Three nearest companies, miles away | 0.7, 1.1, 1.2 |
| Open on Saturdays (per listing) | 44 |
| With 4.5+ stars and at least 10 reviews | 16 |
At the top of the Woods Cross list: General Electric Appliance (8.2 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); Quality Appliance Service (10.7 miles away, based in West Valley City, 4.6 stars from 1,441 reviews); Mr. Appliance of Salt Lake City (12.5 miles away, based in Salt Lake City, 4.7 stars from 1,513 reviews, lists Saturday hours); Titan Appliance Repair (11.9 miles away, based in South Salt Lake, 4.8 stars from 21 reviews, lists Saturday hours).
Know Your GE Dryer
What a GE Dryer Technician Deals With
An electric GE dryer receiving only partial (120V) power from its 240V circuit can tumble normally but produce no heat, and a dryer wired to a 120V circuit can take up to three times longer to dry. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
GE Dryer Symptoms and First Checks
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Clothes still damp after a full cycle
- Outside of the cabinet gets unusually hot
- Squealing, thumping or grinding while it runs
How a Dryer Service Call Usually Goes in Woods Cross
Keeping a GE Dryer Running
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
Dryer Notes for Woods Cross, UT
Most dryer calls in Woods Cross come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
Gas appliance and combustion system work, starting at the outlet of the gas meter, falls under DOPL's construction trades licensing, and the qualifier for an HVAC contractor license must be a Certified Natural Gas Technician. Source: DOPL Contractor Classifications
Before You Book in Woods Cross
- Will you check the vent and lint path as part of the visit?
- Can you look at the washer on the same visit if it is acting up too?
- Is your company licensed where my state requires it, and insured?
GE Dryer Repair FAQs: Woods Cross, UT
What makes a dryer stop heating?
Why does my dryer take so long to dry?
Do you work for GE?
What should I do about a GE error code?
Other Dryer Repair in Woods Cross
GE Dryer Repair Near Woods Cross
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.