A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Who Works on GE Dryers Near St. Albans
We found 25 appliance repair companies within 60 miles of St. Albans. Other nearby bases include Charleston (6), Huntington (2), and Oak Hill (2). The farthest listed company is about 57 miles out. Sears Appliance Repair is the nearest, roughly 0.7 miles from St. Albans. None of the companies within 60 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The 22 rated companies in range average 4.2 stars. St. Albans is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Companies within 60 miles | 25 |
|---|---|
| Open on Saturdays (per listing) | 18 |
| Show laundry appliance work | 9 |
| With 4.5+ stars and at least 10 reviews | 5 |
| Mention GE | 0 |
| Three nearest companies, miles away | 0.7, 7.9, 8.0 |
Closest matches for St. Albans: Sears Appliance Repair (60.4 miles away, based in Grayson, 4.2 stars from 31 reviews, lists Saturday hours); Sears Appliance Repair (8.3 miles away, based in Charleston, 4.6 stars from 21 reviews, lists Saturday hours); Sears Appliance Repair (0.7 miles away, based in St Albans, 4.3 stars from 23 reviews, lists Saturday hours); Sears Appliance Repair (8.0 miles away, based in Scott Depot, 4.1 stars from 39 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
What a GE Dryer Technician Deals With
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Common GE Dryer Problems
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Squealing, thumping or grinding while it runs
- Drum will not turn even though you hear a hum
- Dryer shuts off a few minutes into the cycle
How a Dryer Service Call Usually Goes in St. Albans
Owner Care for GE Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
Around St. Albans
Most dryer calls in St. Albans come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
West Virginia's Division of Labor certifies HVAC technicians for installing, maintaining and repairing heating, ventilating and cooling system components, and the law has no specific appliance repair license or exemption. Source: West Virginia Code Chapter 21, Article 16 (HVAC technician certification), Division of Labor
In West Virginia, you can check a license with the West Virginia Contractor Licensing Board License Lookup or report a problem to the West Virginia Attorney General, Consumer Protection and Antitrust Division.
Hiring a Dryer Repair Company in St. Albans
- What is the service call or diagnostic fee, and is it applied to the repair?
- Will you check the vent and lint path as part of the visit?
- Do you work on gas dryers, and who handles anything involving the gas line?
GE Dryer Repair FAQs: St. Albans, WV
How do I find a technician who knows GE dryers?
Why does my GE dryer show an error code?
Is my GE dryer worth repairing?
Why does my dryer take so long to dry?
Other Dryer Repair in St. Albans
GE Dryer Repair Near St. Albans
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.