Most Kenmore dryer repairs in Washington involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Washington, with those that mention Kenmore first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore appliances were sold through Sears for decades, so many owners look for Sears dryer repair. The companies here are independent technicians who work on Kenmore and Kenmore Elite dryers; they are not Sears.
Kenmore Dryer Repair Near Washington
Within 30 miles of Washington there are 40 appliance repair companies in our data. 25 list an address in Washington, and other nearby bases include Arlington (11), Takoma Park (2), and Brentwood (1). The farthest listed company is about 5 miles out. The closest is Dacor Appliance Repair Team, about 0.5 miles away. No company within 90 miles of Washington mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 33 rated companies in range average 4.5 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 42 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 13 |
| Repair companies inside 30 miles | 60 |
| Distance to the three closest (mi) | 0.5, 0.7, 0.7 |
| Show laundry appliance work | 8 |
| Mention Kenmore | 0 |
At the top of the Washington list: District Appliance Services LLC (5.0 miles away, based in Arlington, 4.9 stars from 133 reviews, lists Saturday hours); Sears Appliance Repair (4.7 miles away, based in Hyattsville, 4.4 stars from 398 reviews, lists Saturday hours); AGB Appliance Repair LLC (4.9 miles away, based in Arlington, 5.0 stars from 411 reviews, lists Saturday hours); Vision Appliance Repair LLC (3.4 miles away, 4.8 stars from 626 reviews, lists Saturday hours).
Kenmore Dryer Lines and Features
How Kenmore Dryers Are Built
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Common Kenmore Dryer Problems
- Dryer not heating. Kenmore says to check for a tripped breaker or blown fuse and, on gas models, confirm the gas supply is on, noting an electric dryer can tumble without heat on a partial circuit. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| gAS (Elite steam dryers) | The gas supply is off on a gas model; open the house and dryer gas shutoffs. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PS (Elite steam dryers) | The power cord on an electric model is wired incorrectly; check the neutral on the center terminal. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Signs Your Kenmore Dryer Needs a Technician
- Clothes still damp after a full cycle
- Drum will not turn even though you hear a hum
- Dryer will not start when you press Start
Inside a Dryer Repair Visit
Care Kenmore Recommends for Its Dryers
- If the lint screen looks clogged when held to the light, scrub it with hot soapy water and a stiff brush and let it dry fully before reinstalling. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Budgeting for a Kenmore Dryer Repair
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
What Washington Owners Should Know
Gas dryers in Washington are typically served by Washington Gas. If you ever smell gas near the dryer, leave the house and call the gas utility from outside before calling a repair company. Source: Washington Gas: Service Territory
The District's Board of Industrial Trades licenses plumbers and gasfitters, electricians and refrigeration and air conditioning mechanics, but does not list appliance repair as a separate licensed trade. Source: Board of Industrial Trades (DC Department of Licensing and Consumer Protection)
Gasfitters are licensed by the District through the Board of Industrial Trades, which offers gasfitting and combined plumbing/gasfitting licenses tested on the International Fuel Gas Code. Source: Plumbing/Gasfitting license information (DC DLCP Board of Industrial Trades)
Questions to Ask a Washington Technician
- Can you look at the washer on the same visit if it is acting up too?
- What guarantee do you give on parts and labor?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
Kenmore Dryer Repair FAQs: Washington, DC
What should I do about a Kenmore error code?
Is my Kenmore dryer worth repairing?
Why do my clothes come out damp?
Related Repair Pages for Washington
More Kenmore Dryer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.