Kenmore owners in Comstock Northwest usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions Kenmore and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore dryers and other brands.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Independent Kenmore Dryer Technicians, Comstock Northwest MI
Our data shows 14 appliance repair companies inside a 30-mile radius of Comstock Northwest. Other nearby bases include Battle Creek (4), Hastings (2), and Kalamazoo (1). None of the companies within 30 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Appliance Tech, LLC is the nearest, roughly 2.4 miles from Comstock Northwest. Across 13 rated companies, the average public rating is 4.2 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Three nearest companies, miles away | 2.4, 10.8, 11.7 |
|---|---|
| Mention Kenmore | 0 |
| Open on Saturdays (per listing) | 9 |
| List dryer or washer & dryer work | 6 |
| Appliance repair companies in range (30 mi) | 14 |
| With 4.5+ stars and at least 10 reviews | 6 |
Closest matches for Comstock Northwest: Sears Appliance Repair (38.7 miles away, based in Coldwater, 4.1 stars from 61 reviews, lists Saturday hours); The Appliance Patch - Plainwell Store (11.7 miles away, based in Plainwell, 4.8 stars from 76 reviews, lists Saturday hours); Allens Appliance Repair (17.3 miles away, based in Battle Creek, 4.9 stars from 72 reviews, lists Saturday hours); Sears Appliance Repair (17.4 miles away, based in Battle Creek, 4.5 stars from 281 reviews, lists Saturday hours).
Kenmore Dryer Lines and Features
What Makes Kenmore Dryer Repairs Different
On Kenmore Elite steam dryers, the display reports ductwork restriction in steps (d80, d90, d95) and a blinking CHECK VENT, which the guide says is an exhaust problem rather than a dryer failure. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Kenmore's compact condensing dryer needs no outside wall vent, runs on a 220V supply and offers manual-drain or direct-drain water removal. Source: Kenmore - 4.0 cu. ft. Front-Load Electric Condensing Dryer
Kenmore Dryer Symptoms and First Checks
- Dryer won't start. Kenmore says to confirm the cord is fully plugged into a grounded outlet and the breaker is intact, and to turn off Control Lock if buttons beep but nothing happens. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer vibrating or noisy. Kenmore says to level the dryer on its four feet without extending them more than needed and keep at least an inch of clearance at the sides and back. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Reading a Kenmore Dryer Error Code
| Code | What it means |
|---|---|
| tE1-tE7 (Elite steam dryers) | A temperature sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| d80 / d90 / d95 (Elite steam dryers) | The exhaust ductwork is roughly 80, 90 or 95 percent blocked; stop using the dryer until the vent is cleaned or repaired. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Signs Your Kenmore Dryer Needs a Technician
- Outside of the cabinet gets unusually hot
- Drum turns but the air stays cool
- Dryer shuts off a few minutes into the cycle
Inside a Dryer Repair Visit
Care Kenmore Recommends for Its Dryers
- Clean the lint trap after every load, since lint that gets past it builds up in the vent and lengthens drying times. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
Price the repair before replacing a Kenmore dryer. Published ranges for common jobs:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
- Whether the dryer is gas or electric
Local Notes for Comstock Northwest
Most dryer calls in Comstock Northwest come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Gas piping work is licensed by the state through mechanical contractor specialty classifications, including fuel gas piping, fuel gas piping and venting, and LP distribution piping. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Hiring a Dryer Repair Company in Comstock Northwest
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- Do you work on gas dryers, and who handles anything involving the gas line?
- If a part has to be ordered, how soon can you come back to finish?
Kenmore Dryer Repair FAQs: Comstock Northwest, MI
Is my Kenmore dryer worth repairing?
Is this Kenmore customer service?
Which Comstock Northwest technicians work on Kenmore?
Related Repair Pages for Comstock Northwest
More Kenmore Dryer Repair Pages Nearby
Write down any error code your Kenmore dryer shows and when it appears. It helps a Comstock Northwest technician bring the right parts.