Most Kenmore dryer repairs in Milford involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Milford, with those that mention Kenmore first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by Kenmore. If your dryer is still under manufacturer coverage, contact Kenmore directly.
Kenmore dryers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.
Who Works on Kenmore Dryers Near Milford
Our data shows 40 appliance repair companies inside a 30-mile radius of Milford. The rest are spread across Livonia (11), Waterford Township (6), and Brighton (3). Distances run up to about 21 miles. None of the companies within 30 miles mention Kenmore by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Nearest on the list: Michigan Appliance Repair, around 7.0 miles out. The 39 rated companies in range average 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 25 |
|---|---|
| Show laundry appliance work | 20 |
| Open on Saturdays (per listing) | 38 |
| Distance to the three closest (mi) | 7.0, 7.7, 8.2 |
| Companies within 30 miles | 60 |
| Mention Kenmore | 0 |
The leading options for Milford are Sears Appliance Repair (83.3 miles away, based in Coldwater, 4.1 stars from 61 reviews, lists Saturday hours); Mr. Appliance of Greater Livingston County (9.9 miles away, based in Brighton, 4.8 stars from 957 reviews, lists Saturday hours); Mr. Appliance of Oakland County (18.3 miles away, based in Livonia, 4.8 stars from 1,216 reviews, lists Saturday hours); Michigan Appliance Repair (7.0 miles away, based in Hartland, 4.8 stars from 863 reviews, lists Saturday hours).
Kenmore Dryer Lines and Features
How Kenmore Dryers Are Built
Kenmore's Check Vent sensor alerts the owner when the dryer is not moving enough air to the outside. Source: Kenmore - Laundry List: Kenmore Dryer Buying Guide
Accela Steam dryers connect directly to the household water supply, so the inlet hose and water pressure (20 to 120 psi) become part of a steam-dryer service check. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
Common Kenmore Dryer Problems
- Clothes wrinkled after drying. Kenmore says to remove clothes promptly, avoid overloading, and use Wrinkle Guard or a short touch-up cycle. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- Dryer takes too long to dry. Kenmore says to clean the lint filter of lint and softener residue and check the exhaust duct for buildup or excess length. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
What Kenmore Dryer Codes Mean
| Code | What it means |
|---|---|
| HS (Elite steam dryers) | The humidity (moisture) sensor has failed; the dryer needs service. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| PF / nP (Elite steam dryers) | A power supply or cord connection problem; check the cord at the terminal block and the house fuse or breaker. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
| CL (Elite steam dryers) | Control Lock is on. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178) |
Kenmore smart washers and dryers can check diagnostics through the Kenmore Smart app or Alexa and send app notices about blocked filters and other machine issues. Source: Kenmore - Kenmore Elite 81782 Smart 7.4 cu. ft. Electric Dryer with Accela Steam
Kenmore Dryer Problems Worth a Service Call
- Dryer will not start when you press Start
- Drum will not turn even though you hear a hum
- Dryer shuts off a few minutes into the cycle
What a Dryer Repair Technician Checks
Keeping a Kenmore Dryer Running
- Use only 4-inch rigid or semi-rigid metal duct (no plastic or foil), check it for lint monthly and clean it at least yearly; one Elite steam model allows about 65 feet with no elbows and 28 feet with four 90-degree elbows using a 4-inch hood. Source: Kenmore - Kenmore Elite Steam Dryer Use & Care Guide (796.8178/796.9178)
- To clean the vent, unplug the dryer, disconnect the duct from the dryer and wall, and vacuum lint from the duct, the wall vent and the back of the dryer. Source: Kenmore - 3 Reasons to Clean Your Dryer Vent (And How to Do It)
Brand guides: Kenmore Dryer Not Heating: Causes and Fixes.
Kenmore Dryer Repair Cost Ranges
A Kenmore dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a Kenmore Dryer Call
- Whether the dryer is gas or electric
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Around Milford
Most dryer calls in Milford come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
How to Choose a Dryer Technician Near Milford
- What is the service call or diagnostic fee, and is it applied to the repair?
- How often do you repair Kenmore dryers, and do you carry common parts on the truck?
- Do you work on gas dryers, and who handles anything involving the gas line?
Kenmore Dryer Repair FAQs: Milford, MI
What makes a dryer stop heating?
Why does my Kenmore dryer show an error code?
Why does my dryer take so long to dry?
Should I repair or replace my Kenmore dryer?
More Laundry Repair in Milford, MI
Kenmore Dryer Repair Near Milford
Before you call, find the model and serial number on your Kenmore dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.