A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. Below are independent repair companies serving Marion, with those that mention GE first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Marion
Our data shows 31 appliance repair companies inside a 30-mile radius of Marion. 4 list an address in Marion, and other nearby bases include Cedar Rapids (18), Iowa City (3), and Robins (1). East Iowa Repair is the nearest, roughly 0.7 miles from Marion. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The 30 rated companies in range average 4.8 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 0.7, 1.5, 1.5 |
|---|---|
| Companies within 30 miles | 31 |
| Open on Saturdays (per listing) | 22 |
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 5 |
| List dryer or washer & dryer work | 4 |
The leading options for Marion are Appliance Plus (32.5 miles away, based in Independence, 5.0 stars from 82 reviews, lists Saturday hours); Sears Appliance Repair (2.5 miles away, based in Cedar Rapids, 4.7 stars from 135 reviews, lists Saturday hours); Parker Appliance Repair Professionals (12.7 miles away, based in Martelle, 5.0 stars from 3 reviews, lists Saturday hours); B & K Appliance Services Inc (1.8 miles away, 5.0 stars from 49 reviews).
GE Dryer Lines and Features
How GE Dryers Are Built
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Common GE Dryer Problems
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Squealing, thumping or grinding while it runs
- Cycles take two or three runs to finish
- Drum will not turn even though you hear a hum
How a Dryer Service Call Usually Goes in Marion
Owner Care for GE Dryers
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
Dryer Notes for Marion, IA
Most dryer calls in Marion come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors
Fuel gas piping falls within Iowa's statutory definition of plumbing, and gas lines tied to HVAC, hydronic and refrigeration systems are covered by those mechanical licenses, all issued by the state Plumbing and Mechanical Systems Board; people qualified under liquefied petroleum gas rules may work on propane equipment and its piping. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors
Before You Book in Marion
- What guarantee do you give on parts and labor?
- If a part has to be ordered, how soon can you come back to finish?
- Can you give a written estimate before ordering parts?
GE Dryer Repair FAQs: Marion, IA
Why is my dryer running but not heating?
Do you work for GE?
Why do my clothes come out damp?
Why does my GE dryer show an error code?
More Laundry Repair in Marion, IA
GE Dryer Repair Near Marion
Write down any error code your GE dryer shows and when it appears. It helps a Marion technician bring the right parts.