If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Dryers Near Fort Meade
Within 30 miles of Fort Meade there are 40 appliance repair companies in our data. The rest are spread across Laurel (6), Columbia (6), and Glen Burnie (4). The farthest listed company is about 11 miles out. Jessup Appliance Repair Tech is the nearest, roughly 3.5 miles from Fort Meade. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Rated companies nearby average 4.3 stars across 38 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention GE | 0 |
|---|---|
| Three nearest companies, miles away | 3.5, 4.1, 4.6 |
| With 4.5+ stars and at least 10 reviews | 20 |
| Appliance repair companies in range (30 mi) | 60 |
| List dryer or washer & dryer work | 9 |
| Listing Saturday hours | 40 |
First up for Fort Meade: District-Columbia Hotpoint Rpr (21.4 miles away, based in Washington, 5.0 stars from 4 reviews, lists Saturday hours); Dr Appliance Repair - Pasadena (8.7 miles away, based in Pasadena, 5.0 stars from 18 reviews, lists Saturday hours); Sears Appliance Repair (7.7 miles away, based in Glen Burnie, 4.2 stars from 908 reviews, lists Saturday hours); Dexterous Appliance Repair (10.4 miles away, based in Fulton, 4.9 stars from 319 reviews).
GE Dryer Lines and Features
How GE Dryers Are Built
Some GE dryers have an airflow sensor that shows a Check Vent alert when exhaust airflow drops, which usually means the vent is blocked. Source: GE Appliances - Dryer - Check Vent Sensor Alert
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Common GE Dryer Problems
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Cycles take two or three runs to finish
- Drum will not turn even though you hear a hum
- Dryer will not start when you press Start
Inside a Dryer Repair Visit
Keeping a GE Dryer Running
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- The brand, model and serial number from the label inside the door or on the back panel
- What happens when you press Start (no response, hum, runs with no heat, stops early)
What Fort Meade Owners Should Know
Most dryer calls in Fort Meade come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
The Maryland Board of Plumbing issues master, journey and apprentice natural gas fitter licenses and a propane gas fitter certificate, and recognizes certain Baltimore County and WSSC gas fitter licenses. Source: Md. Code, Business Occupations and Professions ยง 12-302 (Maryland General Assembly)
How to Choose a Dryer Technician Near Fort Meade
- How often do you repair GE dryers, and do you carry common parts on the truck?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If a part has to be ordered, how soon can you come back to finish?
GE Dryer Repair FAQs: Fort Meade, MD
What should I do about a GE error code?
Is this GE customer service?
Is my GE dryer worth repairing?
Which Fort Meade technicians work on GE?
More Laundry Repair in Fort Meade, MD
GE Dryer Repair in Nearby Cities
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.