Most GE dryer repairs in Laurel involve the same few systems: heat, airflow, the drum drive and the controls. The Laurel list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Laurel
40 repair companies serve Laurel from within 30 miles. 6 list an address in Laurel, and other nearby bases include Silver Spring (8), Columbia (6), and Beltsville (3). Distances run up to about 10 miles. No company within 30 miles of Laurel names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Power Tech Appliance Service, around 0.2 miles out. Rated companies nearby average 4.3 stars across 37 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 0.2, 0.2, 0.7 |
|---|---|
| Repair companies inside 30 miles | 60 |
| Open on Saturdays (per listing) | 42 |
| With 4.5+ stars and at least 10 reviews | 17 |
| List dryer or washer & dryer work | 6 |
| Mention GE | 0 |
At the top of the Laurel list: District-Columbia Hotpoint Rpr (16.6 miles away, based in Washington, 5.0 stars from 4 reviews, lists Saturday hours); Dexterous Appliance Repair (5.5 miles away, based in Fulton, 4.9 stars from 319 reviews); Power Tech Appliance Service (0.2 miles away, 4.1 stars from 42 reviews, lists Saturday hours); Sears Appliance Repair (7.7 miles away, based in Silver Spring, 4.0 stars from 1,337 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
How GE Dryers Are Built
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Cycles take two or three runs to finish
- Drum will not turn even though you hear a hum
- Drum turns but the air stays cool
How a Dryer Service Call Usually Goes in Laurel
Care GE Recommends for Its Dryers
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Timer replacement: $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- Any error code on the display
Around Laurel
Most dryer calls in Laurel come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
Before You Book in Laurel
- What guarantee do you give on parts and labor?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If a part has to be ordered, how soon can you come back to finish?
GE Dryer Repair FAQs: Laurel, MD
Do you work for GE?
Why do my clothes come out damp?
How do I find a technician who knows GE dryers?
Why is my dryer running but not heating?
More Laundry Repair in Laurel, MD
More GE Dryer Repair Pages Nearby
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.