GE owners in Burtonsville usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Burtonsville, with those that mention GE first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Burtonsville
40 repair companies serve Burtonsville from within 30 miles. 3 of them are based in Burtonsville itself, and the rest are spread across Silver Spring (9), Laurel (6), and Columbia (6). Distances run up to about 9 miles. No company within 30 miles of Burtonsville names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Superior Burtonsville Appliance Repair, around 0.3 miles out. Across 36 rated companies, the average public rating is 4.5 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention GE | 0 |
|---|---|
| Open on Saturdays (per listing) | 41 |
| With 4.5+ stars and at least 10 reviews | 13 |
| Distance to the three closest (mi) | 0.3, 0.6, 0.9 |
| List dryer or washer & dryer work | 6 |
| Appliance repair companies in range (30 mi) | 60 |
Closest matches for Burtonsville: District-Columbia Hotpoint Rpr (16.1 miles away, based in Washington, 5.0 stars from 4 reviews, lists Saturday hours); Dexterous Appliance Repair (2.7 miles away, based in Fulton, 4.9 stars from 319 reviews); TruFix Appliance Repair & Services, LLC (5.8 miles away, based in Silver Spring, 4.8 stars from 240 reviews, lists Saturday hours); Sears Appliance Repair (5.8 miles away, based in Silver Spring, 4.0 stars from 1,337 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
What a GE Dryer Technician Deals With
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Says to Check First
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Drum turns but the air stays cool
- Burning or hot smell during a cycle
- Squealing, thumping or grinding while it runs
How a Dryer Service Call Usually Goes in Burtonsville
Care GE Recommends for Its Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Any error code on the display
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
Local Notes for Burtonsville
Most dryer calls in Burtonsville come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
Questions to Ask a Burtonsville Technician
- Can you give a written estimate before ordering parts?
- What guarantee do you give on parts and labor?
- If a part has to be ordered, how soon can you come back to finish?
GE Dryer Repair FAQs: Burtonsville, MD
Do you work for GE?
Should I repair or replace my GE dryer?
What makes a dryer stop heating?
More Laundry Repair in Burtonsville, MD
More GE Dryer Repair Pages Nearby
Write down any error code your GE dryer shows and when it appears. It helps a Burtonsville technician bring the right parts.