GE owners in Maryland City usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Dryers Near Maryland City
Our data shows 40 appliance repair companies inside a 30-mile radius of Maryland City. The rest are spread across Laurel (6), Columbia (6), and Silver Spring (5). Distances run up to about 11 miles. The closest is Laurel Appliance Repair Tech, about 2.1 miles away. No company within 30 miles of Maryland City names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Across 37 rated companies, the average public rating is 4.2 stars.
Companies are shown by relevance and distance from Maryland City. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| List dryer or washer & dryer work | 10 |
|---|---|
| Appliance repair companies in range (30 mi) | 60 |
| Open on Saturdays (per listing) | 44 |
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 19 |
| Three nearest companies, miles away | 2.1, 2.3, 3.2 |
Closest matches for Maryland City: District-Columbia Hotpoint Rpr (18.9 miles away, based in Washington, 5.0 stars from 4 reviews, lists Saturday hours); Dexterous Appliance Repair (7.6 miles away, based in Fulton, 4.9 stars from 319 reviews); Power Tech Appliance Service (3.2 miles away, based in Laurel, 4.1 stars from 42 reviews, lists Saturday hours); Sears Appliance Repair (10.7 miles away, based in Silver Spring, 4.0 stars from 1,337 reviews, lists Saturday hours).
GE Dryer Lines and Features
What Makes GE Dryer Repairs Different
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Outside of the cabinet gets unusually hot
- Clothes still damp after a full cycle
- Drum turns but the air stays cool
What a Dryer Repair Technician Checks
Care GE Recommends for Its Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
What Maryland City Owners Should Know
Most dryer calls in Maryland City come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
Hiring a Dryer Repair Company in Maryland City
- Can you look at the washer on the same visit if it is acting up too?
- Will you check the vent and lint path as part of the visit?
- Do you work on gas dryers, and who handles anything involving the gas line?
GE Dryer Repair FAQs: Maryland City, MD
Why does my dryer take so long to dry?
What should I do about a GE error code?
Do you work for GE?
What makes a dryer stop heating?
Related Repair Pages for Maryland City
GE Dryer Repair Near Maryland City
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.