If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. Below are independent repair companies serving Mount Clemens, with those that mention GE first, then the nearest dryer repair companies.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
GE Dryer Repair Near Mount Clemens
We found 40 appliance repair companies within 30 miles of Mount Clemens. The rest are spread across Clinton Township (6), Warren (5), and Madison Heights (4). Distances run up to about 15 miles. None of the repair companies near Mount Clemens name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is Mr. Appliance of Macomb County, about 0.2 miles away. The 36 rated companies in range average 4.3 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| Distance to the three closest (mi) | 0.2, 1.6, 1.7 |
| Listing Saturday hours | 42 |
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| List dryer or washer & dryer work | 22 |
The leading options for Mount Clemens are Sargent Appliance (3.0 miles away, based in Macomb, 4.8 stars from 1,520 reviews, lists Saturday hours); Detroit Appliance (6.0 miles away, based in Fraser, 4.8 stars from 1,139 reviews, lists Saturday hours); Sargent Appliance (2.5 miles away, based in Clinton Township, 4.8 stars from 690 reviews, lists Saturday hours); AJ's Appliance Repair & HVAC (5.1 miles away, based in Fraser, 4.6 stars from 1,181 reviews).
GE Dryer Lines and Features
What Makes GE Dryer Repairs Different
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Symptoms and First Checks
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Squealing, thumping or grinding while it runs
- Dryer shuts off a few minutes into the cycle
- Dryer will not start when you press Start
How a Dryer Service Call Usually Goes in Mount Clemens
Care GE Recommends for Its Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- Any error code on the display
- How long the vent run is and where it exits the house
What Mount Clemens Owners Should Know
Most dryer calls in Mount Clemens come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Gas piping work is licensed by the state through mechanical contractor specialty classifications, including fuel gas piping, fuel gas piping and venting, and LP distribution piping. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Questions to Ask a Mount Clemens Technician
- Can you look at the washer on the same visit if it is acting up too?
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Mount Clemens, MI
Should I repair or replace my GE dryer?
Why does my dryer take so long to dry?
Why is my dryer running but not heating?
What should I do about a GE error code?
More Laundry Repair in Mount Clemens, MI
More GE Dryer Repair Pages Nearby
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.