GE owners in Fraser usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Fraser
We found 40 appliance repair companies within 30 miles of Fraser. 2 of them are based in Fraser itself, and other nearby bases include Clinton Township (6), Warren (5), and Madison Heights (4). AJ's Appliance Repair & HVAC is the nearest, roughly 0.8 miles from Fraser. None of the repair companies near Fraser name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The 35 rated companies in range average 4.3 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 22 |
|---|---|
| Repair companies inside 30 miles | 60 |
| Show laundry appliance work | 22 |
| Mention GE | 0 |
| Open on Saturdays (per listing) | 42 |
| Distance to the three closest (mi) | 0.8, 0.8, 1.6 |
Closest matches for Fraser: Detroit Appliance (0.8 miles away, 4.8 stars from 1,139 reviews, lists Saturday hours); Sargent Appliance (6.4 miles away, based in Macomb, 4.8 stars from 1,520 reviews, lists Saturday hours); Sargent Appliance (3.2 miles away, based in Clinton Township, 4.8 stars from 690 reviews, lists Saturday hours); AJ's Appliance Repair & HVAC (0.8 miles away, 4.6 stars from 1,181 reviews).
GE Dryer Lines and Features
What Makes GE Dryer Repairs Different
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Common GE Dryer Problems
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Cycles take two or three runs to finish
- Dryer will not start when you press Start
- Drum turns but the air stays cool
How a Dryer Service Call Usually Goes in Fraser
Keeping a GE Dryer Running
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drive motor replacement: $250–$450 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
Around Fraser
Most dryer calls in Fraser come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Questions to Ask a Fraser Technician
- If a part has to be ordered, how soon can you come back to finish?
- How often do you repair GE dryers, and do you carry common parts on the truck?
- Can you look at the washer on the same visit if it is acting up too?
GE Dryer Repair FAQs: Fraser, MI
Do you work for GE?
Why do my clothes come out damp?
What should I do about a GE error code?
Other Dryer Repair in Fraser
More GE Dryer Repair Pages Nearby
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.