GE owners in Sterling Heights usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Dryers Near Sterling Heights
Our data shows 40 appliance repair companies inside a 30-mile radius of Sterling Heights. 2 list an address in Sterling Heights, and other nearby bases include Clinton Township (6), Warren (5), and Madison Heights (4). The farthest listed company is about 10 miles out. The closest is Macomb Appliance Repair, about 3.1 miles away. None of the repair companies near Sterling Heights name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Across 36 rated companies, the average public rating is 4.2 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| List dryer or washer & dryer work | 24 |
|---|---|
| Open on Saturdays (per listing) | 42 |
| Distance to the three closest (mi) | 3.1, 3.4, 3.5 |
| Appliance repair companies in range (30 mi) | 60 |
| With 4.5+ stars and at least 10 reviews | 21 |
| Mention GE | 0 |
Closest matches for Sterling Heights: Sargent Appliance (6.5 miles away, based in Macomb, 4.8 stars from 1,520 reviews, lists Saturday hours); Detroit Appliance (5.5 miles away, based in Fraser, 4.8 stars from 1,139 reviews, lists Saturday hours); Sargent Appliance (7.0 miles away, based in Clinton Township, 4.8 stars from 690 reviews, lists Saturday hours); AJ's Appliance Repair & HVAC (4.3 miles away, based in Fraser, 4.6 stars from 1,181 reviews).
Know Your GE Dryer
What Makes GE Dryer Repairs Different
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Symptoms and First Checks
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Outside of the cabinet gets unusually hot
- Clothes still damp after a full cycle
- Dryer shuts off a few minutes into the cycle
What a Dryer Repair Technician Checks
Care GE Recommends for Its Dryers
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- The brand, model and serial number from the label inside the door or on the back panel
Around Sterling Heights
Most dryer calls in Sterling Heights come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Gas piping work is licensed by the state through mechanical contractor specialty classifications, including fuel gas piping, fuel gas piping and venting, and LP distribution piping. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
Questions to Ask a Sterling Heights Technician
- Is your company licensed where my state requires it, and insured?
- Do you work on gas dryers, and who handles anything involving the gas line?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: Sterling Heights, MI
What should I do about a GE error code?
Why is my dryer running but not heating?
Why does my dryer take so long to dry?
Should I repair or replace my GE dryer?
Related Repair Pages for Sterling Heights
More GE Dryer Repair Pages Nearby
Write down any error code your GE dryer shows and when it appears. It helps a Sterling Heights technician bring the right parts.