If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. Below are independent repair companies serving Saltillo, with those that mention GE first, then the nearest dryer repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Dryer Technicians, Saltillo MS
17 repair companies serve Saltillo from within 60 miles. 1 list an address in Saltillo, and other nearby bases include Oxford (5), Ripley (3), and Booneville (2). Distances run up to about 57 miles. Tutor's Appliance Service is the nearest, roughly 0.6 miles from Saltillo. None of the repair companies near Saltillo name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.5 stars across 17 businesses. Because the nearest shops are farther out, ask each company whether Saltillo is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| List dryer or washer & dryer work | 4 |
|---|---|
| Listing Saturday hours | 7 |
| Repair companies inside 60 miles | 17 |
| Mention GE | 0 |
| With 4.5+ stars and at least 10 reviews | 8 |
| Distance to the three closest (mi) | 0.6, 11.0, 18.7 |
Closest matches for Saltillo: Sears Appliance Repair (28.2 miles away, based in Ripley, 4.8 stars from 118 reviews, lists Saturday hours); Simpson Maintenance, LLC (54.5 miles away, based in Vernon, 4.9 stars from 268 reviews); Sears Appliance Repair (46.9 miles away, based in Oxford, 4.7 stars from 101 reviews, lists Saturday hours); S.I. Service Group (11.0 miles away, based in Tupelo, 4.9 stars from 22 reviews, lists Saturday hours).
GE Dryer Lines and Features
How GE Dryers Are Built
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Says to Check First
- Gas dryer runs but does not heat. GE says to confirm a real drying cycle and temperature are selected, keep the front of the dryer unblocked, check the dedicated 120V outlet, and on new installs make sure the gas line is turned on. Source: GE Appliances - Gas Dryer - Runs But Does Not Heat
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Burning or hot smell during a cycle
- Drum will not turn even though you hear a hum
- Squealing, thumping or grinding while it runs
Inside a Dryer Repair Visit
Care GE Recommends for Its Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
What GE Dryer Repairs Cost
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Door switch replacement: $50–$150 Source: Fixr - How much does it cost to repair a dryer?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- How long the vent run is and where it exits the house
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Whether the dryer is gas or electric
Dryer Notes for Saltillo, MS
Most dryer calls in Saltillo come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Mississippi's State Board of Contractors has no appliance repair classification; it licenses mechanical, HVAC and plumbing contractors, with residential mechanical and plumbing subcontractors required to hold a license. Source: MSBOC: Classifications
Natural gas and liquefied petroleum gas line work falls under the State Board of Contractors' Mechanical classification, while its Plumbing classification excludes fuel gas. Source: MSBOC: Classifications
Questions to Ask a Saltillo Technician
- How often do you repair GE dryers, and do you carry common parts on the truck?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Is your company licensed where my state requires it, and insured?
GE Dryer Repair FAQs: Saltillo, MS
Should I repair or replace my GE dryer?
Do you work for GE?
What makes a dryer stop heating?
What should I do about a GE error code?
Other Dryer Repair in Saltillo
More GE Dryer Repair Pages Nearby
Write down any error code your GE dryer shows and when it appears. It helps a Saltillo technician bring the right parts.