A GE dryer shares most of its parts with other dryers, but its controls, error codes and sensor-dry cycles are specific to the brand. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Dryers Near Franklin
Our data shows 15 appliance repair companies inside a 30-mile radius of Franklin. The rest are spread across Concord (4), Belmont (2), and Bristol (2). Distances run up to about 29 miles. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Accurate Appliance Repair & Service is the nearest, roughly 3.8 miles from Franklin. The 15 rated companies in range average 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Show laundry appliance work | 6 |
|---|---|
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 9 |
| Repair companies inside 30 miles | 15 |
| Three nearest companies, miles away | 3.8, 6.2, 8.2 |
| Open on Saturdays (per listing) | 7 |
Closest matches for Franklin: Sears Appliance Repair (58.1 miles away, based in Newburyport, 4.6 stars from 321 reviews, lists Saturday hours); Baron's Major Brands Appliances - Belmont (9.4 miles away, based in Belmont, 4.8 stars from 685 reviews, lists Saturday hours); Baron's Major Brands Appliances- Concord (17.9 miles away, based in Concord, 4.8 stars from 1,619 reviews, lists Saturday hours); Sears Appliance Repair (18.1 miles away, based in Concord, 4.6 stars from 280 reviews, lists Saturday hours).
GE Dryer Features Technicians Work On
How GE Dryers Are Built
GE allows only rigid or flexible metal vent duct and says plastic flexible duct is not acceptable because it collapses, cuts airflow and can collect water. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
What GE Says to Check First
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
- Dryer will not run or start. GE's first check is that the dryer plug is pushed fully into the wall outlet. Source: GE Appliances - Dryer - Will Not Run or Start
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Dryer will not start when you press Start
- Outside of the cabinet gets unusually hot
- Dryer shuts off a few minutes into the cycle
What a Dryer Repair Technician Checks
Keeping a GE Dryer Running
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
GE Dryer Repair Cost Ranges
A GE dryer repair usually costs about the same as any other brand for the same part. Published ranges:
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
If a repair would cost more than about half the price of a new dryer, replacing is usually the better choice. Source: Angi - How Much Does It Cost to Repair a Dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- How long the vent run is and where it exits the house
Local Notes for Franklin
Most dryer calls in Franklin come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
New Hampshire has no license for appliance repair as such; fuel gas work, including gas appliance installation and service, is licensed by the Mechanical Safety and Licensing Board, whose licenses are limited to their named specialty. Source: N.H. RSA 153:29 (NH General Court)
Fuel gas fitters are licensed by the state Mechanical Safety and Licensing Board, with specialty licenses that include fuel gas installation technician, service technician and piping installer. Source: N.H. RSA 153:29 (NH General Court)
Before You Book in Franklin
- Do you work on gas dryers, and who handles anything involving the gas line?
- Is your company licensed where my state requires it, and insured?
- How often do you repair GE dryers, and do you carry common parts on the truck?
GE Dryer Repair FAQs: Franklin, NH
Why does my GE dryer show an error code?
Why does my dryer take so long to dry?
Should I repair or replace my GE dryer?
Other Dryer Repair in Franklin
GE Dryer Repair Near Franklin
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.