Most GE dryer repairs in Kearns involve the same few systems: heat, airflow, the drum drive and the controls. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
Independent listings only: Washer and Dryer Repair is not affiliated with or endorsed by GE. If your dryer is still under manufacturer coverage, contact GE directly.
Who Works on GE Dryers Near Kearns
We found 40 appliance repair companies within 30 miles of Kearns. 1 list an address in Kearns, and other nearby bases include West Jordan (13), West Valley City (6), and Midvale (5). The farthest listed company is about 7 miles out. FreshStart Appliance Repair Salt Lake City is the nearest, roughly 0.8 miles from Kearns. No company within 30 miles of Kearns names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 23 rated companies in range average 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 40 |
|---|---|
| Mention GE | 0 |
| Appliance repair companies in range (30 mi) | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 15 |
| Show laundry appliance work | 11 |
| Three nearest companies, miles away | 0.8, 1.1, 1.5 |
First up for Kearns: General Electric Appliance (9.8 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); Quality Appliance Service (5.5 miles away, based in West Valley City, 4.6 stars from 1,441 reviews); Eagle Appliance Repair (5.4 miles away, based in West Jordan, 4.9 stars from 204 reviews, lists Saturday hours); Famous Appliance Service (6.4 miles away, based in Midvale, 4.6 stars from 805 reviews).
GE Dryer Features Technicians Work On
How GE Dryers Are Built
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Clothes still damp after a full cycle
- Dryer shuts off a few minutes into the cycle
- Squealing, thumping or grinding while it runs
Inside a Dryer Repair Visit
Owner Care for GE Dryers
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Drum bearing replacement: $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- The brand, model and serial number from the label inside the door or on the back panel
- How long the vent run is and where it exits the house
Local Notes for Kearns
Most dryer calls in Kearns come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
Gas appliance and combustion system work, starting at the outlet of the gas meter, falls under DOPL's construction trades licensing, and the qualifier for an HVAC contractor license must be a Certified Natural Gas Technician. Source: DOPL Contractor Classifications
How to Choose a Dryer Technician Near Kearns
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on gas dryers, and who handles anything involving the gas line?
- If a part has to be ordered, how soon can you come back to finish?
GE Dryer Repair FAQs: Kearns, UT
Should I repair or replace my GE dryer?
Which Kearns technicians work on GE?
What makes a dryer stop heating?
What should I do about a GE error code?
Other Dryer Repair in Kearns
GE Dryer Repair Near Kearns
Clean the lint screen, check the vent hood outside and note the model number before calling. It rules out the simple causes and speeds up a GE repair.