Most GE dryer repairs in North Ogden involve the same few systems: heat, airflow, the drum drive and the controls. The North Ogden list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near North Ogden
Within 30 miles of North Ogden there are 22 appliance repair companies in our data. 2 list an address in North Ogden, and the rest are spread across Ogden (3), Clearfield (3), and Clinton (2). Distances run up to about 30 miles. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The closest is Integrity Appliance Repair, about 0.8 miles away. Rated companies nearby average 4.3 stars across 15 businesses.
Companies are shown by relevance and distance from North Ogden. A mention does not mean manufacturer certification, so ask each company about its experience with your dryer.
| Companies within 30 miles | 22 |
|---|---|
| Distance to the three closest (mi) | 0.8, 1.0, 6.4 |
| List dryer or washer & dryer work | 1 |
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 9 |
| Listing Saturday hours | 13 |
The leading options for North Ogden are General Electric Appliance (38.6 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); iFiX, LLC (10.3 miles away, based in Riverdale, 4.9 stars from 436 reviews); Ben Lomond Appliance Repair llc (1.0 miles away, 5.0 stars from 155 reviews, lists Saturday hours); R.A.C.E.R. Service Appliance Repair (25.8 miles away, based in Nibley, 4.7 stars from 12 reviews).
Know Your GE Dryer
What a GE Dryer Technician Deals With
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Reading a GE Dryer Error Code
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
When to Call for GE Dryer Repair
- Dryer shuts off a few minutes into the cycle
- Drum will not turn even though you hear a hum
- Dryer will not start when you press Start
What a Dryer Repair Technician Checks
Care GE Recommends for Its Dryers
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum roller replacement: $100–$150 Source: Fixr - How much does it cost to repair a dryer?
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Appliance technician diagnosis, washer (usually waived if hired for the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- Any error code on the display
Around North Ogden
Most dryer calls in North Ogden come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
Gas appliance and combustion system work, starting at the outlet of the gas meter, falls under DOPL's construction trades licensing, and the qualifier for an HVAC contractor license must be a Certified Natural Gas Technician. Source: DOPL Contractor Classifications
Before You Book in North Ogden
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on gas dryers, and who handles anything involving the gas line?
- What guarantee do you give on parts and labor?
GE Dryer Repair FAQs: North Ogden, UT
Is this GE customer service?
Why is my dryer running but not heating?
Should I repair or replace my GE dryer?
Why does my dryer take so long to dry?
More Laundry Repair in North Ogden, UT
More GE Dryer Repair Pages Nearby
Before you call, find the model and serial number on your GE dryer's label, usually inside the door opening. A technician who knows the model can often tell you on the phone what the first visit will involve.