Most GE dryer repairs in Washington Terrace involve the same few systems: heat, airflow, the drum drive and the controls. Below are independent repair companies serving Washington Terrace, with those that mention GE first, then the nearest dryer repair companies.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
Who Works on GE Dryers Near Washington Terrace
Within 30 miles of Washington Terrace there are 40 appliance repair companies in our data. The rest are spread across Salt Lake City (14), Ogden (3), and Clearfield (3). Reliable Appliance Repair Specialists is the nearest, roughly 1.6 miles from Washington Terrace. Of those, 1 mentions GE by name. The 29 rated companies in range average 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 1 |
|---|---|
| List dryer or washer & dryer work | 1 |
| Repair companies inside 30 miles | 41 |
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Distance to the three closest (mi) | 1.6, 2.0, 3.1 |
| Listing Saturday hours | 28 |
Closest matches for Washington Terrace: General Electric Appliance (28.8 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); iFiX, LLC (2.0 miles away, based in Riverdale, 4.9 stars from 436 reviews); Ben Lomond Appliance Repair llc (10.5 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); Famous Appliance Service (21.6 miles away, based in North Salt Lake, 4.7 stars from 510 reviews).
GE Dryer Lines and Features
What a GE Dryer Technician Deals With
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Sensor dry models must sit level so tumbling clothes contact the moisture sensors; an unlevel dryer can end cycles with clothes still damp. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
What GE Says to Check First
- Check Vent alert. GE says to unplug the dryer, disconnect and vacuum the duct, and make sure the outside hood damper moves freely. Source: GE Appliances - Dryer - Check Vent Sensor Alert
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
What GE Dryer Codes Mean
| Code | What it means |
|---|---|
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Outside of the cabinet gets unusually hot
- Dryer shuts off a few minutes into the cycle
- Dryer will not start when you press Start
How a Dryer Service Call Usually Goes in Washington Terrace
Owner Care for GE Dryers
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- On the UltraFast Combo, clean the mesh lint filter about every fifth dry cycle or when prompted, and clean the foam filter and filter compartment about every 50 cycles. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Heating element replacement: $150–$350 Source: Fixr - How much does it cost to repair a dryer?
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermal fuse repair: $80–$130 Source: Angi - How Much Does It Cost to Repair a Dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Dryer not heating (repair by symptom): $80–$420 Source: Angi - How Much Does Dryer Repair Cost?
- Technician service / diagnostic fee, dryer: $50–$80 per visit Source: Fixr - How much does it cost to repair a dryer?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Getting Ready for the Repair
- Whether the dryer is gas or electric
- How long the vent run is and where it exits the house
- The brand, model and serial number from the label inside the door or on the back panel
Dryer Notes for Washington Terrace, UT
Most dryer calls in Washington Terrace come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
Gas appliance and combustion system work, starting at the outlet of the gas meter, falls under DOPL's construction trades licensing, and the qualifier for an HVAC contractor license must be a Certified Natural Gas Technician. Source: DOPL Contractor Classifications
Hiring a Dryer Repair Company in Washington Terrace
- Do you work on gas dryers, and who handles anything involving the gas line?
- Can you look at the washer on the same visit if it is acting up too?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Dryer Repair FAQs: Washington Terrace, UT
Why does my dryer take so long to dry?
What makes a dryer stop heating?
How do I find a technician who knows GE dryers?
More Laundry Repair in Washington Terrace, UT
GE Dryer Repair Near Washington Terrace
Write down any error code your GE dryer shows and when it appears. It helps a Washington Terrace technician bring the right parts.