If your GE dryer has stopped heating, stopped tumbling or started throwing an error code, the technician you call should know the model line. We flag companies whose listing or website mentions GE and fill in with nearby dryer repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Dryer Technicians, Clinton UT
We found 40 appliance repair companies within 30 miles of Clinton. 2 of them are based in Clinton itself, and other nearby bases include Salt Lake City (14), Clearfield (3), and Ogden (3). The farthest listed company is about 28 miles out. 1 lists GE specifically. Nearest on the list: United Appliance Service, around 0.1 miles out. Rated companies nearby average 4.6 stars across 29 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| List dryer or washer & dryer work | 2 |
|---|---|
| Distance to the three closest (mi) | 0.1, 0.3, 2.2 |
| Open on Saturdays (per listing) | 28 |
| Rated 4.5 stars or higher (10+ reviews) | 15 |
| Appliance repair companies in range (30 mi) | 43 |
| Mention GE | 1 |
First up for Clinton: General Electric Appliance (28.1 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); iFiX, LLC (3.3 miles away, based in Riverdale, 4.9 stars from 436 reviews); Ben Lomond Appliance Repair llc (13.3 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); Famous Appliance Service (20.8 miles away, based in North Salt Lake, 4.7 stars from 510 reviews).
GE Dryer Features Technicians Work On
What a GE Dryer Technician Deals With
An electric GE dryer receiving only partial (120V) power from its 240V circuit can tumble normally but produce no heat, and a dryer wired to a 120V circuit can take up to three times longer to dry. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
GE Dryer Symptoms and First Checks
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Dryer takes too long to dry. GE points first to venting (metal duct, no kinks, clear wall cap) and a clean lint filter, then to load size, dryer level and washer spin speed. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
GE Dryer Error Codes
| Code | What it means |
|---|---|
| Confirm H2O Supply is ON (UltraFast Combo) | No water is entering the unit; controls lock for a few minutes while you check the water supply valves. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
Signs Your GE Dryer Needs a Technician
- Clothes still damp after a full cycle
- Drum turns but the air stays cool
- Dryer will not start when you press Start
How a Dryer Service Call Usually Goes in Clinton
Keeping a GE Dryer Running
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- GE does not state one maximum vent length on its support pages; it says to follow the model's installation instructions for allowed duct length and number of elbows, and recommends a 4-inch outside wall cap. Source: GE Appliances - Dryer - Things To Check For A Venting Issue
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Most GE dryer repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drum belt replacement: $150–$250 Source: Fixr - How much does it cost to repair a dryer?
- Thermostat replacement: $100–$260 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Typical dryer repair: $100–$200 Source: Fixr - How much does it cost to repair a dryer?
- Service call fee (may be waived if the technician does the repair): $50–$80 per visit Source: Angi - How Much Does It Cost to Repair a Dryer?
Replacement makes more sense once a dryer is about 10 years old or past half its expected lifespan. Source: Fixr - How much does it cost to repair a dryer?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
Before the Technician Arrives
- The brand, model and serial number from the label inside the door or on the back panel
- Any error code on the display
- What happens when you press Start (no response, hum, runs with no heat, stops early)
Dryer Notes for Clinton, UT
Most dryer calls in Clinton come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Dryer Repair Company in Clinton
- Can you give a written estimate before ordering parts?
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on gas dryers, and who handles anything involving the gas line?
GE Dryer Repair FAQs: Clinton, UT
Why does my dryer take so long to dry?
Do you work for GE?
Why is my dryer running but not heating?
Is my GE dryer worth repairing?
Other Dryer Repair in Clinton
More GE Dryer Repair Pages Nearby
Write down any error code your GE dryer shows and when it appears. It helps a Clinton technician bring the right parts.