GE owners in Stansbury Park usually want two things from a repair company: experience with the brand and quick access to parts. The Stansbury Park list starts with companies that name GE, followed by other appliance repair companies that list dryer work.
Washer and Dryer Repair is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dryers and other brands.
GE Dryer Repair Near Stansbury Park
40 repair companies serve Stansbury Park from within 30 miles. The rest are spread across West Jordan (13), West Valley City (6), and South Jordan (5). Distances run up to about 21 miles. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The closest is Mr. Appliance of Tooele, about 6.4 miles away. The 23 rated companies in range average 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 6.4, 7.3, 11.6 |
|---|---|
| List dryer or washer & dryer work | 10 |
| With 4.5+ stars and at least 10 reviews | 14 |
| Open on Saturdays (per listing) | 41 |
| Companies within 30 miles | 60 |
| Mention GE | 0 |
The leading options for Stansbury Park are General Electric Appliance (23.6 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); Quality Appliance Service (19.1 miles away, based in West Valley City, 4.6 stars from 1,441 reviews); Eagle Appliance Repair (19.5 miles away, based in West Jordan, 4.9 stars from 204 reviews, lists Saturday hours); Mr. Appliance of Tooele (6.4 miles away, based in Tooele, 4.8 stars from 352 reviews, lists Saturday hours).
Know Your GE Dryer
What Makes GE Dryer Repairs Different
The GE Profile UltraFast Combo uses a two-stage filter system (a mesh lint filter plus a second mesh or foam filter) located between the display and the dispenser drawers. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Filter Cleaning
What GE Says to Check First
- Electric dryer runs but does not heat. GE says to confirm the dryer has a dedicated 240V supply, reset the breaker fully off and on, and then inspect the power cord and terminal block for burned or loose connections. Source: GE Appliances - Electric Dryer - Runs But Does Not Heat
- Dryer hot to the touch or sweating. GE says this usually means heat and humidity cannot escape, so clean the exhaust duct, clear the wall cap and confirm the elbow count suits the vent length. Source: GE Appliances - Dryer - Hot to the Touch or Sweats
GE Dryer Error Codes
| Code | What it means |
|---|---|
| 18 (UltraFast Combo) | The drain pump filter needs cleaning; loads may also come out wet or take longer to dry, and the drain hose should not be pushed too far into the standpipe. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| Check and Clean Drain Pump Filter (UltraFast Combo) | A restriction, often a loose item, was detected in the drain area and the pump filter should be cleaned. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
| 353 (UltraFast Combo) | The lint filter is likely clogged, often with fabric softener residue; cleaning the filter clears it. Source: GE Appliances - GE Profile UltraFast Combo Washer/Dryer - Fault & Error Codes and Status Messages |
GE Dryer Problems Worth a Service Call
- Dryer shuts off a few minutes into the cycle
- Dryer will not start when you press Start
- Burning or hot smell during a cycle
What Gets Fixed on a Stansbury Park Dryer Call
Care GE Recommends for Its Dryers
- Inspect and clean the exhaust duct at least once a year by unplugging the dryer, disconnecting the duct and vacuuming it, and check that the outside hood flaps move freely with no nests inside. Source: GE Appliances - Dryer - How to Clean Exhaust / Vent Duct
- Clean the lint filter before every load and periodically wash it in warm soapy water to remove fabric softener film. Source: GE Appliances - Dryer - Taking Too Long To Dry Clothes or Not Drying at All
Brand guides: GE Dryer Not Heating: What to Check.
Budgeting for a GE Dryer Repair
Price the repair before replacing a GE dryer. Published ranges for common jobs:
- Igniter replacement (gas dryer): $100–$250 Source: Fixr - How much does it cost to repair a dryer?
- Control board (part only): $90–$280 Source: Angi - How Much Does Dryer Repair Cost?
- Gas valve coil replacement (gas dryer): $150–$300 Source: Fixr - How much does it cost to repair a dryer?
- Typical dryer repair (most homeowners): $100–$430 Source: Angi - How Much Does Dryer Repair Cost?
- Technician labor: $50–$100 per hour Source: Angi - How Much Does Dryer Repair Cost?
A dryer that keeps needing repairs despite regular maintenance is usually cheaper to replace. Source: Angi - How Much Does Dryer Repair Cost?
Ranges are published estimates, not quotes. See the dryer repair cost guide and how long dryers last.
What to Have Ready for a GE Dryer Call
- What happens when you press Start (no response, hum, runs with no heat, stops early)
- Any error code on the display
- How long the vent run is and where it exits the house
Dryer Notes for Stansbury Park, UT
Most dryer calls in Stansbury Park come down to the same handful of parts: the vent and lint path, the heat source, the belt and rollers, and the door and start switches.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Stansbury Park Technician
- If a part has to be ordered, how soon can you come back to finish?
- How often do you repair GE dryers, and do you carry common parts on the truck?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Dryer Repair FAQs: Stansbury Park, UT
Why does my dryer take so long to dry?
How do I find a technician who knows GE dryers?
Why does my GE dryer show an error code?
Should I repair or replace my GE dryer?
Related Repair Pages for Stansbury Park
GE Dryer Repair Near Stansbury Park
Write down any error code your GE dryer shows and when it appears. It helps a Stansbury Park technician bring the right parts.